Graphics Card HIS 7850 IceQ X Turbo X Review

The number of graphics solutions designed by HIS cannot be figured from a cursory calculation only. Indeed, the company's product line counts dozens of cards destined at various audiences, with various needs and budgets. Take HIS HD 7850 series alone: it consists of ten models (three with 1GB memory and seven with 2GB memory). The latest HIS 7850 IceQ X Turbo X belongs to '2GB echelon' and is distinguished by the heightened GPU and memory frequency. Upon the whole, this graphics adapter features outstanding cooling and overclocking facilities.



Design and PCB


Graphics adapter HIS 7850 IceQ X Turbo X is a standard representative of the second HD 7850 revision. It is housed on a short printed circuit board and is equipped with only a single power socket, two heatpipes and a large fan. HIS developers advanced the heatpipes outside the board to elongate its contours; nevertheless, this card can't be considered voluminous, since its width hasn't been touched at all. The top part …

MSI B75IA-E33 - cost-effective Mini-ITX board for processors Ivy Bridge

In early August, it was mentioned about the fact that MSI developer of motherboards is preparing to release three new products in the form factor Mini-ITX on chipsets A85, B75, and Z77. As it turned out, the first low-cost board will be MSI B75IA-E33 — it will start selling in Europe at the end of this week at prices ranging from € 95.



The functionality of this product is limited with respect to the other two models; however, a set of components in B75IA-E33 is very decent. LGA1155 processor socket is energized by three phases (provides additional power to the ATX12V 4-pin), hidden under a small cooler chipset Intel B75. Available one connector PCI Express 3.0 x16, two slots for memory modules DDR3-1066/1333/1600 total up to 16 GB, SATA port 6Gb / s and SATA 3 Gbit / s (3 units) to connect storage devices.


A pair of USB 3.0 on the rear panel are completed with a 19-pin connector on the PCB, through which on the front panel I / O can be taken two SuperSpeed USB. The …

Computer Case be quiet! Silent Base 600 Overview (Part II)

Internal structure

The motherboard compartment is located above the power supply unit. In this regard, everything is quite standard for a Mid Tower class. A large cutout is made in a tray behind a CPU socket, to allow installation of a CPU cooling system directly into the case; a backplate mount (thrust-pad located on the back side of the motherboard) is used for this purpose.


The four large slots in a tray, equipped with the silicone membrane, are designed for proper cable management which looks very promising here. Plugs of expansion slots are attached by thumbscrews. The front part holds a hard disks’ basket for three drives.


At the back side a slot in a tray can be clearly seen to access cable management system slot. Also, the rear side contains two tool kits for installation of solid-state drives and size 2.5" hard disks.


The side cover is made of 0.7 mm steel, and from the inside has a thick vibration and noise absorbing coating. The recess in the …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 22 October 2011, 20:57
Last visit: 22 October 2011, 20:57