Two New SSD Series for Corporate Clients from Samsung

Samsung has recently announced the release of two new SSD series, intended basically for the employment in corporate segment (for servers and large data storages). The first series, codenamed SM843, will be represented by models of 120GB, 240GB and 480GB capacity; the second series, codenamed SM1625, will contain models of 100GB, 200GB, 400GB, and 800GB capacity.

All the models within the series are based on MLC NAND flash-memory, developed under 20 nm technological process. This allowed the company to increase the writing speed index and SSDs durability three times as much, if compared with rival drives and items of the previous generation.

SM843 solid-state drives are designed in 2.5-inch form-factor. They are notable by 28% lower power consumption in active mode and 80% lower retention time. The models employ SATA 3.0 interface and demonstrate the following speed showings: consecutive Read speed achieves the point of 520 Mb/sec, consecutive Write speed equals to 420 …

Meet New Transcend HSD740 SSDs for Universal Usage

Transcend has pushed along its new solid-state drive of half-slim form-factor — HSD740. The drive is based on a high-quality NAND flash-memory with MLC architecture and is intended at the employment in a wide spectrum of platforms: small-sized portative devices, laptops, enterprise PCs, as well as in gaming consoles. This model features only 54x39x4 mm dimensions and will come in two capacity variations (32 GB and 64 GB).

Transcend HSD740 employs an up-dated SATA 6 Gb/sec interface to provide for the utmost data transfer speeds. The maximal speed index on sequential Read operations equals to 510 Mb/sec, while on sequential Write operations this index does not trespass 185 Mb/sec.

Support of SATA Device Sleep (further on DevSleep) mode deserves special praise. This mode ensures that this solid-state drive consumed minimum power on diverse operational conditions. On its activation, SATA interface gets totally disabled on stand-by time; at the same time, it is able to …

Platinum PSU FSP Aurum 92+ 650W Review

Up-to-date power supply units are able to achieve 80-90% efficiency due to 80 Plus standard. The integration of this standard provides for better power-saving facilities, heat level and noise level. Still, some customers give preference to performance rather than energy saving; thus PSUs from FSP will become the most wise solution for such people. Last year FSP introduced Aurum series and today the company expands the line with a new model — Aurum 92+. The model is represented so far with a single power variation – 650W, and corresponds to 80 Plus Platinum requirements.

General Peculiarities

Correspondence to Platinum standards implies that FSP Aurum 92+ unit should demonstrate not less than 91% nominal efficiency, 90% efficiency at 20 percent loading, and 94% efficiency at 50 percent loading. Testing results prove the claimed characteristics, making this model a desirable high-end acquirement. Aurum 92+ is delivered in a standard cardbox that contains FSP logo …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 10 May 2012, 00:14
Last visit: 10 May 2012, 00:14