Gigabyte Showcases GA-Z170X Gaming 3 Mainboard

Gigabyte expands its line of gaming products with a new ATX motherboard, entitled GA-Z170X Gaming 3. The key peculiarity ascribed to the model is the support for the latest Intel Skylake-S CPU (14 nm) with LGA 1151 socket. The new-comer takes Intel Z170 chipset as the basis and draws power via 24-pin ATX as well as 8-pin EPS power sockets. Besides, the board belongs to the mainstream customer segment, so its price won’t go higher than $188.



Gigabyte GA-Z170X Gaming 3 is furnished with 7-phase VRM, four slots for DDR4-3400 MHz RAM (two-channel) of up to 64 GB capacity, a pair of PCIe 3.0 x16 slots for the installation of graphics cards (support for CrossFireX and SLI configurations), a single PCIe 3.0 x4 slot, and three PCIe 3.0 x1 slots.


Storage subsystem might be organized due to six SATA III ports (bandwidth – 6 Gb/sec), three SATA Express ports (bandwidth – up to 16 Gb/sec), and a couple of M.2 slots with bandwidth index up to 32 Gb/sec.


In addition, this …

Aresze Announces Chassis with Noiseless Cooling System

Enthusiasts and gamers might sigh with relief after their prolonged attempts to find the chassis for the creation of high-performance gaming systems. Aresze is going to release chassis, codenamed Seediq 8003, of new generation which is a perfect match for high-end gaming systems with unique cooling facilities. The chassis is developed in midi-tower form factor and features 520x215x508 mm dimensions. The casing is made of steel alloy, and is ready to accommodate motherboards of micro-ATX and ATX standards.



Despite the average dimensions, Aresze Seediq 8003 is compatible with CPU fans of 175 mm in height, large graphics adapters of up to 300 mm in length with HDD bays and up to 430 mm – without HDD bays, as well as, power supply units of ATX/EPS standard. This chassis has got quite efficient internal layout. Hence, it's equipped with ten sections for drives (four external 5.25 inch drives and six internal 2.5- 3.5 inch drives) and eight PCI slots for four graphics adapters.
… …

EVGA GeForce GTX 660 Ti

Due to the unknown paparazzi the photos of the upcoming graphics card EVGA GeForce GTX 660 T leaked to the Internet. As it can be seen it is made almost on the reference design of Nvidia. The main differences of EVGA board from the reference — design of the casing of the cooling system, the logo on the fan housing and the clock frequency.



The video card is made on the printed circuit board on the PCI Express 3.0 x16 bus and is equipped with a proprietary dual-slot cooler of active type. Its «heart» is created on 28-nm chip with 1344 GK104 CUDA cores and advanced architecture Kepler. On board there is a 2048 MB of GDDR5 memory with 192-bit and a frequency of 6008 MHz. In fact, core graphics core frequency is 980 MHz, and accelerated by the NVIDIA GPU Boost function value is equal to 1023 MHz.


Dimensions of the cooler are the same as the GeForce GTX 670, but the circuit board is expected to be shorter. It is believed that the card uses the GPU GK104-325-A2 analogically to …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 31 May 2011, 14:13
Last visit: 31 May 2011, 14:13