Chieftec Launches Flyer Series FS-01B-U3 Chassis

Chieftec, a well-known German designer of prime-class hardware pieces, advertises the launch of a new budgetary mini-tower PC chassis, entitled Flyer Series FS-01B-U3. The model features 420x175x360 mm dimensions and is ready to welcome mATX and mini-ITX motherboards. The case boasts a totally black exterior with a glossy frontal panel and metallic patches on it.

This chassis comes with a pre-installed iArena power supply unit of 350/450 W capacity. It is based on CWT platform. The inventory also includes a pair of 5.25-inch optical drive bays, four 3.5/2.5-inch HDD/SSD bays. The case accommodates four PCI expansion slots that support the installation of rather lengthy graphics cards (up to 320 mm). Internal layout allows for the employment of standard CPU coolers of up to 130 mm in height.

I/O panel is located on the frontal facet. It is represented by two USB 3.0 ports and two audio jacks. In terms of cooling, Flyer Series FS-01B-U3 provides for quite versatile fan …

Akasa Blade: Solid Mid Tower for gamers and enthusiasts

The range of chassis Mid Tower from the company the Akasa is added by new model called the Blade and its modification Blade Distinction Edition with a transparent window on the side wall, which are addressed in the first place for demanding users from among gamers and computer enthusiasts.

Both new products are painted black inside and out, have a grilled front panel and are available in versions with blue or red front LED. They are made of sheet steel of thickness 0.7 mm, have dimensions of 207 x 521,5 x 491,5 mm, compatible with standard Micro-ATX/ATX and have seven expansion slots.

Each of the buildings is equipped with one 3.5-inch and three 5.25-inch external bays, and has internal seats to install five 3.5-inch and three 2.5-inch drives. The maintenance of optimum temperature inside the products is managed by three fans, namely a 120-mm front, a 170-mm on the upper lid and one 120mm rear. In addition, realized the possibility of the application of liquid cooling …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Gender: Female
Date of birth: 13 March 1975
Registered at: 04 December 2011, 15:26
Last visit: 25 December 2012, 22:21