The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …

The Tempered Glass Edition of the Thermaltake Core X71 Chassis

The Thermaltake Company has announced a new Core X71 version of chassis. This solution is called Tempered Glass Edition and is produced in black colour.



One of the novelty’s panels possesses a window out of 4 mm tempered glass instead of the formerly used acrylic panel.


Due to its dual-chamber structure the chassis has much of the inner space, which allows to assemble a PC of almost any complexity with the liquid cooling system utilization.

Motherboards of Mini ITX, Micro ATX and ATX typical sizes can be installed. The maximum number of expansion cards is eight. One can use discrete graphics accelerators of up to 420 mm length.


In the front part of this product, there is enough room to mount a 480 mm heatsink, and it’s possible to install a 360 mm heat dissipator at the top. The preassembled power supply unit length equals to 220 mm.


The dimensions of this full tower chassis by Thermaltake are the following: 677 × 250 × 511 mm.


Unfortunately, the …

Meet New External HDD Armor A30 from Silicon Power

Silicon Power, a renowned manufacturer of flash-memory devices, is going to release a new external HDD, entitled Armor A30. The drive features 134x87.5x18.6 mm dimensions and is estimated to operate at +5-+55 C temperatures. The most outstanding peculiarity pertained to Armor A30 is its compliance with MIL-STD 810G Method 516.6 Procedure IV standard. This implies the drive is housed in a super-solid ‘silica gel’ case that is able to survive the fall from a height of 122 cm, strong vibrations, temperature alterations, and to resist dust and water.



Silicon Power armor A30 will be available in two capacities (500 GB and 1 TB) and two color variations (white and black). All the models employ high-speed USB 3.0 interface and offer some notable performance. Hence, these HDDs feature maximal 5 Gb/sec data transfer speed (USB 3.0 interface) and up to 480 MB/sec (USB 2.0 interface). It should be stressed that the drive receives power via USB interface as well and is compatible with …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 13 August 2012, 05:42
Last visit: 13 August 2012, 05:46