Asus Preps H110M-E/M.2 Mainboard with M.2 Socket 3 Support

Asus decided to distinguish itself against the rivals by introducing a motherboard, based on Intel H110 chipset, which boasts a range of integrated facilities. One of such boons is the support for M.2 Socket 3 interface with a bandwidth index of 10 Gb/sec. However, when it operates in SATA mode, one out of four SATA 6 Gb/sec ports is disabled. If PCI-e drive is installed, there will be no restrictions.



Mainboard Asus H110M-E/M.2 supports all modern CPUs from Intel with Socket LGA1151. The PCB accommodates a pair of DIMM slots for the installation of 32 GB DDR4-2133 MHz memory. This micro-ATX board is equipped with a 4-phase Digi+ VRM as well as 5X Protection II protection technology.


The model houses a pair of PCI-e 2.0 x1 expansion slots & a single PCI-e 3.0 x16 slot. Storage subsystem is introduced by one M.2 slot and 4x SATA III ports. Audio subsystem is built on 8-channel Realtek ALC887 controller, whereas network facilities are backed by Realtek RTL8111H controller. …

Xilence presented Torino chassis for mainboards size Mini-ITX

Xilence Company has introduced its first hull with sizetype Mini-ITX – it got the name Torino (or the original codename — GEH-XP-TORINO). The manufacturer claims that the new product, despite its compact size, expressed by the dimentions 348 x 214 x 219 mm, is well suited for construction of «a full-fledged handheld gaming PC.»



Externally Xilence Torino made in the form of its older brothers, Interceptor and Interceptor Pro, and basic material of production is 0.8 mm thick steel. The hull is equipped with three external bays (one 5.25-inch size and two 2.5 inch size) and four internal (all sizes 3.5 inches). On the front panel there are two ports USB 3.0 display and two 3.5 mm jacks for headphones and microphone.


The rear panel of Xilence Torino has two bays for expansion cards. The installation of video cards up to 270 mm is also supported. According to reports of manufacturer, they fulfilled a goal of improving the ventilation of 3D-cards, which have specially …

Cooler Master V4 GTS Review: CPU Cooler with a Horizontal Vapor Chamber

The emergence of high-efficient processors incited the necessity to provide high-efficient cooling. It’s not a secret that utmost system performance directly depends upon CPU conditions. The more intense the loading is, the more appropriate thermal environment should be. Here everything is interrelated. Cooler Master, being one of the foremost global manufacturers of cooling solutions, always tries to comply with the rising demands to CPU thermal conditions. Thus, the launch of another cooler intended for extreme heat dissipation was quite an expected event. Codenamed V4 GTS, the product differentiates itself by the availability of a horizontal vapor chamber that enhances the cooling effect.



Design and Integration


Cooler Master V4 GTS features an unusual design, resembling a truck’s engine. Its surface is totally covered by a plastic shield, except for bare heatsink ribs at both sides. The overall framework has got symmetric elaboration with a well-considered …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 20 February 2012, 09:42
Last visit: 20 February 2012, 09:42