ASRock Launches a New Motherboard with Intel SBA Support

ASRock announces the launch of a new budget-priced motherboard B75M-DGS R2.0. The model does not differentiate itself by an attractive design or wide overclocking facilities, as far as its main predestination is a stable operation in large corporate networks. The board is known to support Intel Small Business Advantage (SBA) software applet that optimizes PC operation and increases its performance. Despite such promising commodities, its price doesn't go over $60 per unit.

ASRock B75M-DGS R2.0 is designed in micro-ATX form-factor; this limits the number of supported expansion slots and other interfaces. As seen from the codename, the motherboard is based on Intel B75 system logics and shows compatibility with Intel Celeron, Intel Pentium and Intel Core i3/i5/i7 processors (second and third generation) compatible with Socket LGA1155. Memory subsystem consists of two DIMM slots which support two-channel DDR3-2200 MHz modules, the overall capacity of which might achieve 16GB …

Deepcool to Release an Updated Lucifer K2 Efficient CPU Cooler

Deepcool has introduced a ‘companion’ to its well-known cooler entitled Lucifer V2. The all-new Lucifer K2 features 163x146.5x131 mm dimensions and weighs 1047 g. The new-comer supports AMD and Intel platforms, including LGA2011-v3, LGA2011, LGA1366, LGA115x, LGA775 (Intel) & Socket FM2, FM2+, FM1, AM2, AM2+, AM3, AM3+ (AMD) as well as various CPUs with TDP level of not more than 130 W.

Deepcool Lucifer K2 boasts a purely-polished copper base, six copper heatpipes and an aluminum heatsink (140x110x163 mm). The latter ensures a large heat dissipation area. Despite having stately proportions, the cooler does not block off the access towards DIMM slots.

The key differentiation between V2 and K2 models lies in the choice of a fan. The previous solution featured a 140-mm item, while the newer one – a 120-mm fan, based on a fluid-dynamic bearing. The fan supports PWM technology that provides for a wide rotational range — from 600 RPM to 1800 RPM, — generating up to …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 23 December 2011, 19:41
Last visit: 23 December 2011, 19:41