ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

EK Water Blocks Releases a Specialty, Intended for EVGA GeForce GTX 1080 Ti FTW3 Graphics Cards

The EK Water Blocks manufacturer released a water block meant for EVGA GeForce GTX 1080 Ti FTW3 video cards, equipped with the GDDR5X memory, operating at the 11 GHz QDR rated frequency.



Like other EKWB products, the novelty is compatible with liquid cooling systems utilizing pumps of an average efficiency. The liquid can flow directly and inversely. According to modern tendencies, EK Water Blocks supplies a hook-up terminal with a plastic overlay, reporting a graphics accelerator’s model name.


The water unit base is performed out of nickel-plated copper and connected to a GPU, memory chips and power components. The decorative part of this product can be made out of black or transparent polymeric material. The transparent element presupposes the presence of two LED locations.


Both EK-FC1080 GTX Ti FTW3 water block versions cost 122.95 EUR, a black fastening plate is available at 29.95 EUR, and a nickelized variant costs 37.95 EUR. These products will hit the shelves …

Deepcool Announces a Pair of Maelstrom Liquid Coolers

Deepcool has extended Maelstrom lineup of liquid coolers with two new models – the 120T and the 240T. The key distinction between the pair is the amount of 120 mm fans employed (one or two). Both come equipped with red LED backlights and show compatibility with the majority of update Intel & AMD platforms. The maximal supported CPU TDP level makes up 140/150 W.



Deepcool Maelstrom 120T comes with a single fan, whereas its companion, 240T, features a couple of fans, based on fluid bearing with 50.000 hours MTBF. The units run at 1800 RPM, creating up to 83.64/167.28 CFM and 17-34 dB of noise (depending on the model).


Both coolers employ a ceramic pump (70x85.6x31.5 mm), estimated for 120.000 hours of fail-proof operation & running at 2400 RPM. The pump features a copper base with micro-channels, connected with solid rubber hoses and an aluminum heatsink. The new-comers are linked to the system by means of 4-pin connectors.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 05 August 2012, 09:43
Last visit: 08 September 2012, 04:51