Kingmax Releases High-Performance SSD Series with SATA III Interface

Demands of customers towards the performance of SSDs become tougher each day. In this respect, the necessity to produce truly qualitative products goes to the limelight. Kingmax marches in step with the prevailing tendencies and releases high-performance SSD series, codenamed Client Pro. The series is represented by two models, SMU32 and SMU35, which go in 60GB, 120GB, 240GB, and 480GB volume capacities. These SSD models boast SATA III interface and high-speed synchronous flash-memory which are called to promote for the outstanding Write and Read speeds.



SSDs Kingmax SATA III Client Pro are based on high-end Sandforce controller that enables the boost of performance, reliability and data security facilities. The manufacturer employs the highest level of synchronous memory with the purpose to ensure the products' durability and retention of speeds in the course of time. If compared with the SSDs based on asynchronous memory type, Client Pro series is able to demonstrate more …

The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …

Cooler for graphics cards Deepcool Dracula

Radiator Deepcool with a frightening name is big and heavy, takes three adjacent PCI-E slots, and is expensive, but the efficiency is worth of consideration. About a year ago, the company Deepcool Industries Co., Ltd. released a cooler for graphics cards with high-sounding name Dracula.



The model has proved very successful, it stood out with very high level of efficiency and, most importantly, it is compatible with many video cards. But during time after release of «Dracula» AMD and NVIDIA have released new video cards, with some of which the cooler is not compatible. In particular, the lower the location of the GPU chip Tahiti requires revision of the cooler and Deepcool was not losing time, releasing a second version of Dracula.


The cooler is packed in a small cardboard box in black with a minimum of information on all sides. In this way Deepcool tried to emphasize cooler belonging to the dark forces and involvement in all the famous vampire of the Romanian …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.41
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 01 November 2011, 18:51
Last visit: 25 November 2011, 22:03