SilentiumPC Launches All-Powerful Grandis XE1236 CPU Cooler

SilentiumPC has announced the release of its newest cooling solution – an all-powerful Grandis XE1236 CPU cooler. The model features 130x105x158 mm dimensions and weighs 1160 g. According to the manufacturer, it is able to manage heat on top loading, preserving CPU in sober thermal conditions. The cooler is backed by a 2-year’s warranty and comes at $49.



SilentiumPC Grandis XE1236 consists of a copper base, six U-shape heatpipes (6 mm), a two-section aluminum heatspreader with a polished base, and a pair of fans of 120 mm dimensions. The GF12-25 fans are based on a fluid-dynamic bearing that is set to demonstrate up to 50 thousand hours of fool-proof operation.


To continue, the connection to the motherboard is realized via 4-pin connector. The fans might operate at +12V voltage, accelerating speed from 500 RPM to 1500 RPM due to PWM technology support. On the maximal speed the noise level does not exceed 21 dB. Upon the whole, the blades can produce up to 55 CFM …

Thermaltake Outs Core P5 Green Edition Chassis

A few months after the release of a chassis with an entirely open-air design, Thermaltake decided to release one more modular solution but with a gaudy exterior. The Core P5 Green Edition boasts bright-green coloring of one of the side plates as well as totally transparent other panels. The middle-tower case features 608x333x570 mm dimensions, similar to its predecessor. Likewise, the greenhorn has received analogous hardware base.



Therefore, Thermaltake Core P5 Green Edition is targeting the installation of mini-ITX, micro-ATX and full ATX motherboards with up to 8 expansion slots. Internal spacing offers 4 slots for 3.5-/2.5-inch drives and allows for the installation of quite long graphics cards (up to 320 mm), high CPU coolers (up to 180 mm) and standard power supply units (up to 200 mm in length).


The chassis might be cooled down by four 120-mm or three 140-mm fans, located on the left-side panel. As an alternative to the air cooling, the user can integrate …

Enermax Outs High-Flown Twister Pressure Fan

One of the major requirements for an efficient CPU cooler is a high static pressure. The higher this index is, the more productive the blades are. Quite the contrary, the main requirement for a system fan is a volume of produced airflow, since it affects the air circulation within the case. Taking into account those facts, Enermax decided to elaborate a fan that would unite both demands. That is how Twister Pressure fan came into the market.



Enermax Twister Pressure is a high-efficiency fan targeting to be implementing within CPU cooling solutions. It is based on Twister Bearing 2, which framework has been optimized for a reliable operation under unfavorable thermal conditions (up to 85 degrees) and under high dust content. The second version of Twister Bearing is supposed to run over 160.000 hours in fail-proof mode; this is 60% more than the initial version could perform.


To continue, this fan offers three operational modes: Performance, Silent and Ultra Silent. All of …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 10 December 2011, 15:16
Last visit: 19 December 2011, 10:17