Gigabyte Showcases GA-Z170X Gaming 3 Mainboard

Gigabyte expands its line of gaming products with a new ATX motherboard, entitled GA-Z170X Gaming 3. The key peculiarity ascribed to the model is the support for the latest Intel Skylake-S CPU (14 nm) with LGA 1151 socket. The new-comer takes Intel Z170 chipset as the basis and draws power via 24-pin ATX as well as 8-pin EPS power sockets. Besides, the board belongs to the mainstream customer segment, so its price won’t go higher than $188.



Gigabyte GA-Z170X Gaming 3 is furnished with 7-phase VRM, four slots for DDR4-3400 MHz RAM (two-channel) of up to 64 GB capacity, a pair of PCIe 3.0 x16 slots for the installation of graphics cards (support for CrossFireX and SLI configurations), a single PCIe 3.0 x4 slot, and three PCIe 3.0 x1 slots.


Storage subsystem might be organized due to six SATA III ports (bandwidth – 6 Gb/sec), three SATA Express ports (bandwidth – up to 16 Gb/sec), and a couple of M.2 slots with bandwidth index up to 32 Gb/sec.


In addition, this …

Enermax Outs High-Flown Twister Pressure Fan

One of the major requirements for an efficient CPU cooler is a high static pressure. The higher this index is, the more productive the blades are. Quite the contrary, the main requirement for a system fan is a volume of produced airflow, since it affects the air circulation within the case. Taking into account those facts, Enermax decided to elaborate a fan that would unite both demands. That is how Twister Pressure fan came into the market.



Enermax Twister Pressure is a high-efficiency fan targeting to be implementing within CPU cooling solutions. It is based on Twister Bearing 2, which framework has been optimized for a reliable operation under unfavorable thermal conditions (up to 85 degrees) and under high dust content. The second version of Twister Bearing is supposed to run over 160.000 hours in fail-proof mode; this is 60% more than the initial version could perform.


To continue, this fan offers three operational modes: Performance, Silent and Ultra Silent. All of …

Enermax Starts Selling Chassis Hoplite ST

Enermax Technology Corp. has voiced good news about the appearance of its new chassis Hoplite ST in the European market. The basic destination of Hoplite ST model is the creation of gaming PCs of the entry and middle level. The chassis is developed in midi-tower form factor and is compatible with motherboards of micro-ATX and ATX standards. Hoplite ST is delivered in two colors: models with black casings were codenamed ECA3261-B, while models with white casings – ECA3261-W.



The casing is made of SECC steel and has got rather convenient framework. The chassis contains four external 5.25 inch bays and six internal ones destined as for 3.5 inch drives, so for 2.5 inch drives. It is also equipped with seven expansion slots, and ready to accommodate graphics cards of up to 403 mm in length, as well as, CPU coolers of 167 mm in height.


The nominal delivery kit of Hoplite ST chassis involves two 120 mm fans. The frontal fan goes with LED lighting; the other fan is located at …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 23 August 2011, 10:57
Last visit: 23 August 2011, 10:57