The Tempered Glass Edition of the Thermaltake Core X71 Chassis

The Thermaltake Company has announced a new Core X71 version of chassis. This solution is called Tempered Glass Edition and is produced in black colour.



One of the novelty’s panels possesses a window out of 4 mm tempered glass instead of the formerly used acrylic panel.


Due to its dual-chamber structure the chassis has much of the inner space, which allows to assemble a PC of almost any complexity with the liquid cooling system utilization.

Motherboards of Mini ITX, Micro ATX and ATX typical sizes can be installed. The maximum number of expansion cards is eight. One can use discrete graphics accelerators of up to 420 mm length.


In the front part of this product, there is enough room to mount a 480 mm heatsink, and it’s possible to install a 360 mm heat dissipator at the top. The preassembled power supply unit length equals to 220 mm.


The dimensions of this full tower chassis by Thermaltake are the following: 677 × 250 × 511 mm.


Unfortunately, the …

Greeting Small-Sized J1800I Motherboard from MSI

MSI has recently added J1800I model to its mini-ITX motherboards inventory. The new-comer features 170x170 mm dimensions and is characterized by a low power consumption level. This makes it a desirable acquirement for builders of small-sized, power-efficient PC systems and multimedia devices. The board boasts Military Class 4 design that involves high-quality hardware components, including Dark Chokes and solid-state capacitors.



MSI J1800I is based on Intel Celeron J1800 CPU (22 nm) that runs at 2.41 GHz frequency but might be overclocked to 2.58 GHz. It consumes only 10 W power, being cooled down by a single aluminum heatsink. The PCB accommodates two SO-DIMM slots for two-channel DDR3 memory modules with the maximum frequency of 1333 MHz and the maximum capacity of 8 GB.


To continue, the hardware inventory embraces two SATA II 3 Gb/sec ports for the connection of drives. The availability of one PCI Express 2.0 x 1 slot enables the connection of a supplementary expansion …

Enermax Outs High-Flown Twister Pressure Fan

One of the major requirements for an efficient CPU cooler is a high static pressure. The higher this index is, the more productive the blades are. Quite the contrary, the main requirement for a system fan is a volume of produced airflow, since it affects the air circulation within the case. Taking into account those facts, Enermax decided to elaborate a fan that would unite both demands. That is how Twister Pressure fan came into the market.



Enermax Twister Pressure is a high-efficiency fan targeting to be implementing within CPU cooling solutions. It is based on Twister Bearing 2, which framework has been optimized for a reliable operation under unfavorable thermal conditions (up to 85 degrees) and under high dust content. The second version of Twister Bearing is supposed to run over 160.000 hours in fail-proof mode; this is 60% more than the initial version could perform.


To continue, this fan offers three operational modes: Performance, Silent and Ultra Silent. All of …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 01 September 2011, 10:27
Last visit: 01 September 2011, 10:27