Transcend produces memory kits aXeRam DDR3-2400 and DDR3-2133 with 8 GB of memory

The widely represented in the market a series of RAM sets Transcend aXeRam is now added with dual channel kit DDR3 of 8 GB with an effective frequency of 2133 and 2400 MHz. Modules are routinely equipped with aluminum radiators with high «scallops» and support overclocking profiles Intel XMP 1.3, actual for the processors Intel Ivy Bridge.



The package Transcend aXeRam DDR3-2133 2x 4 GB consists of two brackets with a combination of delay of memory 10-11-10-27 and moderate voltage 1.6 V. Overclocking enthusiasts will certainly prefer against it more productive Transcend aXeRam DDR3-2400 for the same amount. Timings have been raised in a given set up to 11-12-11-29, and default voltage — up to 1.65 V.


To increase the stability of the new items, they are made on an 8-layer PCB. Overclocking spirit of the tandem Transcend aXeRam DDR3-2133/2400 emphasizes the possibility of fine tuning by the utility aXeMod. In addition, aXeMod monitors the temperature of the memory.


In …

ASRock Surfaces J3355B-ITX Mainboard

ASRock enters the market with a mainboard, targeting new Intel Apollo Lake CPUs (14 nm, Intel Goldmont micro-architecture). The J3355B-ITX model is thought to be integrated within laptops or entry-level all-in-one solutions. As seen from the codename, the board is developed in mini-ITX form-factor. It comes equipped with Intel Celeron J3355 processor, operating at 2.0-2.5 GHz frequency. The CPU features 10 W TDP; hence, cooling is backed by a noiseless passive cooler.



ASRock J3355B-ITX accommodates a pair of SO-DIMM slots for DDR3/DDRL3 modules with 1866 MHz frequency (up to 16 GB). The board comes with an integrated Intel HD Graphics 500 GPU that runs at 700 MHz. The connection of drives is realized via two SATA III ports. The incorporated PCIe 2.0 x16 slot is optimal for expansion cards, rather than a VGA card.


To continue, audio subsystem is based on 7.1-channel Realtek ALC887 controller, whereas network facilities are ensured with the help of Realtek RTL8111GR …

Next year TSMC will start manufacturing the first 20nm chips

The Taiwanese company TSMC confirmed its intention to start production of chips using 20 nm technological processes in 2013. However, for now the company does not plan its production on an industrial scale and will release the first chips in a limited quantities, giving them a total of 1% of production capacity. According to the head of the company, the mass production of semiconductor chips with this technology will not begin until 2014.



Meanwhile TSMC Company is going to produce only one version of the chip, which will be able to enter into the wide range of devices, from smart phones with low-power to high-performance graphics cards. For comparison, the Taiwanese company currently has four different output chips on 28-nm technology. These are 28LP (poly / SiON) for low-power low-cost chips, 28HPL (HKMG) for use in low power applications, 28HP (HKMG) for high-performance chips and 28HPM (HKMG). The latest version combines elements of high-performance chips with high efficiency …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 19 November 2011, 00:40
Last visit: 19 November 2011, 00:49