Thermaltake to Release a New Urban Chassis: Urban R31

Thermaltake Technology has just annunciated the release of yet another representative of Urban series: Urban R31. The chassis features mid-tower form-factor with 511x206x490 mm dimensions. It might boast a minimalist design concept with totally black coating, steel case, and aluminum frontal facet. The company offers the model in two framework variations: with an onboard side window and with a blind side facet. Unfortunately, there is no news so far concerning the pricing and an exact release date.

Thermaltake Urban R31 is ready to accommodate ATX or micro-ATX motherboards. Its internal layout comprises three 5.25-inch drive bays, six 3.5-inch drive bays, and one 2.5-inch drive bay. In addition, the chassis comes with a built-in dock-station on the top facet, ready to house one more 3.5/2.5-inch drive. Closer to the rear facet one can find seven PCI expansion slots.

To continue, spacing within the case allows for the integration of rather lengthy graphics cards (up to 410 …

The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.

The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.

At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.

Scythe ACB-Type3 is equipped with sufficient number of …

They Did It! Official Release of AMD Radeon HD 7990 ‘Malta’

Much rumored reference graphics adapter from AMD has been recently officially introduced. As it was suggested before, Radeon HD 7990, codenamed ‘Malta’, employs two Tahiti XT2 GPUs, each of which contains 128 TMUs, 32 rasterization blocks (ROPs), and 2048 current processors (GCN architecture). Smooth work of both graphics cores is synchronized by means of PLX PEX8747 controller that supports 48 lines of PCI Express 3.0. Nominal clock frequencies ascribed to GPUs operation equal to 950 MHz, but Turbo mode enables the increase of frequencies up to 1000 MHz.

Video memory is represented by GDDR5 memory modules, the overall capacity of which equals to 6 GB (3 GB per each graphics core). Memory modules utilize 384-bit bus and run at 6000 MHz frequency with bandwidth of 288 Gb/sec per core. The incorporated PCB accommodates a single CrossFireX socket for the creation of various graphics configurations, including Quad-CrossFireX. Video interface panel boasts the availability of …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 09 May 2011, 21:46
Last visit: 09 May 2011, 21:46