Mushkin Showcases New Reactor Solid-State Drives

Mushkin Enhanced is about to launch a new series of top-tier SSDs within the framework of Reactor series. The series, represented by three models of 256 GB, 512 GB and 1 TB capacity, is targeting up-to-date gaming and high-performance systems. The greenhorns are developed in 2.5-inch form-factor with 7 mm thickness only and SATA III 6 Gb/sec interface.



Mushkin Reactor drives take Silicon Motion SM2246EN controller in cooperation with MLC NAND flash-memory as the basis. Their utmost sequential data transfer speed equals to 560 Mb/sec and 460 Mb/sec on Read/Write operations respectively, while random data transfer speed achieves 74.000 IOPS and 76.000 IOPS correspondingly.


The triple is thought to operate 1.5 million hours without failures in rather tough conditions (in working environments with up to 70 degrees temperature). All models support TRIM instructions, DevSleep mode that prolongs standalone operation of a mobile device on battery power supply, and the newest …

A 2-Fan Cooler GeForce GTX 1050 WINDFORCE 2G Graphics Card From GIGABYTE

The GIGABYTE company has officially introduced a new graphics card, named GIGABYTE GeForce GTX 1050 WINDFORCE 2G (GV-N1050WF2-2GD). It possesses such peculiarities as refined PC-board design and a modified cooling system.



GIGABYTE GeForce GTX 1050 WINDFORCE 2G is based on a 14 nm NVIDIA GP107-300 GPU, supporting 640 CUDA, 40 TMU and 32 ROP. This video card can operate in one of pre-set modes – “Gaming” or “OC”. Its frequency formula goes in accord with the benchmark of 1354 / 1455 MHz in the first case and 1379 / 1493 MHz in the second. At the same time 2 GB of GDDR5 memory work at the reference effective frequency of 7008 MHz.


The PC-board is improved due to the Ultra Durable VGA company concept and an enhanced 4+1-phase power subsystem construction with one 6-pin PCIe connector. The power supply subsystem design features one copper composite heat pipe, an aluminum heat sink, a stiffening plate on the reverse side and a pair of axial fans. At low load the cooler …

Palit to Release a Pair of GTX 1060 Video Cards

Palit is enlarging its lineup of GeForce GTX 1060 adapters with a pair of new models. The GTX 1060 Dual 3GB and the GTX 1060 StormX 3G are developed on Nvidia GP106-300 GPUs (16 FinFet), featuring 1152 CUDA cores, 72 TMUs & 48 ROPs. It runs at 1506/1708 MHz frequency (standard/dynamic). Both models are accompanied by 3 GB of GDDR5 memory (192-bit bus) that operates at 2000/8000 MHz frequency (standard/efficient).



The key differentiation between the models lies in the cooling system. Palit GeForce GTX 1060 StormX 3G is equipped with a single fan, replenished with a main heatsink and an additional one, housed on the power circuit. In its turn, Palit Geforce GTX 1060 Dual 3GB is fitted with a voluminous rectangular heat spreader, three copper heat pipes as well as two fans. Thus, it’s an ideal choice for overclockers.


Both video cards employ a single 6-pin connector to draw power. They feature a high-quality hardware base which counts solid-state capacitors, DrMOS chips, …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 December 2011, 15:43
Last visit: 03 December 2011, 15:59