Meet Strike-X Air and Vx Advance Series from Aerocool

Devotees of a futuristic design and uncommon framework cannot but revel in the launch of new chassis Strike-X Air from Aerocool developers. The long-awaited product is already in the market, as well as new Vx Advance series. Chassis Strike-X Air is distinguished by the ultra-original design and open-end framework type. According to the words of Aerocool representatives, the major emphasis has been made on the handiness of usage so that each person could have a direct access to any component of the chassis.

The chassis of Strike-X Air is made of steel and supports motherboards of Micro ATX, E-ATX and ATX dimension type, and graphics cards of 330 mm. length. Expansion cards and interface panels are installed due to the ten slots in the rear part of the device. The chassis is equipped with three external modules of 5.25 and 3.5 inches type. The clipboard is intended for a single USB 3.0 socket, three USB 2.0 sockets, and a couple of 3.5 mm. sockets for headsets with a microphone. … …

Meet Small-Sized QC5000M Mainboard from ASRock

ASRock enters the mainboard market with a new micro-ATX solution, entitled QC5000M. The greenhorn takes Kabini platform as the basis, featuring AMD A4-5000 hybrid processor (28 nm) with 4 Jaguar cores and 1.5 GHz clock frequency. The APU is accompanied by two slots for one-channel DDR3-1600 MHz RAM (up to 32 GB) and an integrated AMD Radeon HD 8330 graphics (500 MHz clock frequency, compatibility with DirectX 11.1 standard).

The implemented APU boasts 15 W TDP only, requiring a small-sized heatsink for efficient cooling. The model takes power via 24-pin ATX connector and is based on AMD A68 chipset. It is equipped with a single PCI Express 2.0 x16 slot, a pair of PCI Express 2.0 x1 slots, and the same amount of SATA III 6 Gb/sec ports.

Network and audio facilities are represented by Realtek RTL8111GR Gigabit Ethernet controller and 7.1-channel Realtek ALC887 codec respectively. Additionally, the PCB is furnished with ELNA sound capacitors. The rear side of the motherboard …

ECS Debuts with a New GTX660TIA-2GR5-WFM Graphics Card

ECS, a well-known designer of graphics solutions, announces the release of its new graphics card GeForce GTX 660 Ti, also known as GTX660TIA-2GR5-WFM. The card is elaborated on the basis of a reference adapter from Nvidia. GPU GK104 (designed according to 28 nm technological process) is the heart of the model. It consists of 1344 CUDA cores and features 915 MHz nominal frequency that can be dynamically overclocked to 980 MHz.

Memory subsystem of ECS GeForce GTX 660 Ti embraces 2 GB of GDDR5 memory that runs at the nominal 1502 MHz frequency but can be increased to the effective 6008 MHz mark. The manufacturer decided not to alter recommended by Nvidia parameters in their own version. The connection with GPU resources is realized via 192-bit rail.

This graphics card employs PCI-e 3.0 x16 internal interface. A set of external video interfaces totally corresponds to the etalon requirements and involves one DisplayPort, one HDMI, and a pair of DVI ports.

To continue, …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 23 January 2012, 07:59
Last visit: 23 January 2012, 14:18