Overview of the LogicPower 7777 Case

In the last couple of years, the chassis with the division of the interior into two zones has become very popular. In the lower part, as a rule, there is a power supply unit and drives, and in the upper part – all the other components. Almost all manufacturers now have similar models. This fashion did not pass around LogicPower, where it was embodied in the case of LP 7777 from the Perfect series.


Characteristics

Case type: Midi-Tower

Dimensions, mm: 470 (H) x 210 (W) x 448 (D)

Material: ABS plastic, steel

Weight, kg: 4.4

Color: Black

Form factor: ATX

Devices 5.25": 2

3.5" external devices: –

3.5"/2.5" internal devices: 2/2

Supported expansion slots: 7

Front fans: 3 x 120 mm (optional)

Upper fans: 1 x 120/140 mm (optional)

Rear fans: 1 x 120 mm (optional)

Side fans: 2 x 120 mm (optional)

Internal fans: 2 x 120 mm (optional)

Interface sockets: 2 x USB 2.0, 1 x USB 3.0, microphone in and headphone out

New Video Accelerators from AMD Will Be Based on Vega 10 Chips

According to available information, AMD will introduce two new lines of graphics accelerators next quarter. Those are Radeon RX Vega and Radeon RX 500.



Radeon RX Vega will be constructed with Vega architecture based GPU, and Radeon RX 500 will inherit accelerators, built on renamed Polaris series chips, which are well-known due to Polaris 12 chips and Radeon RX 400 cards. It is also reported, that latest driver packages for Linux contain an ID list of devices, designed with a Vega 10 graphics engine.


The data obtained indicate, that in the short term seven devices will be equipped with the Vega 10 chip. In particular, these products will include Radeon RX Vega video cards, alongside with high-end Radeon Instinct and Radeon Pro WX families accelerators.


Please note, that the Radeon RX 500 official announcement is expected to take place on the 18th of April, and Radeon RX Vega will be presented during the Computex 2017 event, which is planned to be conducted in Taipei …

Meet Coolbay TX Casing from Nox

The segment of Mid-Tower casings has just replenished with a new product from Nox manufacturers – Coolbay TX. This model is primarily oriented on customers who put design, layout and performance in the foreground, and who appreciate the possibilities of ‘individual arrangement’ pertained to separate components. The latter concerns mostly the nominal delivery set which is void of fans. Each customer is able to install up to six fans manually and monitor their work (the fans rotation speed) by means of the integrated controller.



Nox Coolbay TX casing is made of steel and goes in black color. Its weight reaches up 9.5 kg which is considered to be quite a lot for the casings developed in Mid-Tower form factor. The casing is equipped with a metallic array, a large transparent window on the side plate, and a handled blue LED. The top plate accommodates an integrated dock-station for a single 3.5 inch or 2.5 inch drive. Coolbay TX stipulated the availability of removable …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.41
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 06 April 2011, 11:46
Last visit: 20 November 2011, 13:23