ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

Plextor Prepares the Release of M5P SSD

Plextor is currently preparing a new SSD series, codenamed M5P. According to the forecasts, this series will be differentiated by high-performance characteristics and Serial ATA 3.0 interface. M5P will be represented by three models of 128 GB, 256 GB and 512 GB volume capacities. All the model lines are developed with the utilization of 19 nm technological process. In addition, all SSDs will be equipped with NAND flash-memory (MLC Toshiba) and Marvell 88SS9187 controllers.



Three models differ from one another by the flash-memory volume. Thereby, 128 GB models accommodates 256 MB of DDR3 cache-memory, 256 GB model – 512 MB, and the last one, 512 GB model – 768 MB. Those SSDs support SATA 6 Gb/sec.


The manufacturer claim that the maximal consecutive reading and writing speeds will achieve 540 Mb/sec and 340 Mb/sec correspondingly (with 128 GB model); 256 GB and 512 GB models will achieve 540 Mb/sec in reading and 450 Mb/sec in writing mode. At the same time, M5P series …

Aerocool to Advance Project 7-Chassis 1

Aerocool has just announced the release of a new stylish chassis, codenamed Project 7-Chassis 1. The greenhorn is distinguished not only by a catchy exterior but also by a spacious interior. The case houses a side window, made of a tempered glass, as well as a LED backlight on the front panel; the latter is regulated by means of dedicated buttons on the top facet.



Featuring 550x446.4x244.6 mm dimensions, Aerocool Project 7-Chassis 1 is ready to welcome motherboards of mini-ITX/micro-ATX/ATX format with up to 7 expansion slots. There are six slots in total for the mounting of drives: a pair of 3.5-inch bays and four 2.5-inch items. The layout allows for the integration of a 165-mm high CPU cooler and a 400-mm long video card (+ a standard ATX PSU).


The model comes equipped with a single pre-installed 120-mm fan on the rear plate. There is a possibility to enhance cooling with the help of five additional fans, mounted on the front and top panels. The user is able to manage …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 18 July 2012, 19:24
Last visit: 18 July 2012, 19:24