Xilence Company has presented a kilowatt power supply unit of XQ series

Taiwanese company Xilence released two PSU of unusual design — XQ Series of 750 and 850 W capacities. In contrast to usual offers on the market, these PSU are equipped with a pair of 60-mm fans. It has separate adjustment of speed and can operate in a completely passive mode at a load of up to 20-30%.

Recently, Xilence added to the above-mentioned series a power supply with nominal 1000W. New model in the pre-sale testing was certified with 80 Plus Platinum, which indicates the level of efficiency from 90% to 94% in the system of 230 V. Like its predecessors, the unit uses a modular principle of cabling, active power factor correction mechanism and complies with ATX12V v2.3 and EPS12V v2.92 standards. The list of available power cables (connectors) is the following: 4x PCI-E 6-pin, 4x PCI-E (6 + 2)-pin, 7x Molex 4-pin, FDD, 12x SATA, EPS12V (4 +4)-pin, EPS12V 8-pin and ATX (20 +4)-pin.

Five-year warranty on the Xilence XQ 1000W provides the possibility of replacement the …

ASRock Fatal1ty Z170 Professional Gaming i7: Ambitious Mainboard for Ambitious Gamers

Gamers all over the world have got another cause for rejoicing: the debut of Fatal1ty Z170 Professional Gaming i7 motherboard. According to ASRock, the model is the most efficient mainboard in the company’s lineup. Designed in ATX form-factor, it’s based on Intel Z170 chipset that is ready to welcome Intel Skylake CPUs with LGA1151 socket (Core i3/i5/i7, Pentium, Celeron).

ASRock Fatal1ty Z170 Professional Gaming i7 captures the eyes by a true gaming black-and-red color gamut and a selected hardware base. The 12-phase VRM system provides power to the most demanding processors. Besides, all the components are cooled down by means of a passive cooler.

The PCB offers 4 DIMM slots which are targeting DDR4 memory modules with 3866+ MHz clock frequency. The maximal capacity of the integrated memory might not exceed 64 GB. To create storage subsystem the user might employ 4x SATA III ports, 3x SATA Express (compatible with SATA III), and 3x Ultra M.2 slots with 32 Gb/sec …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 20 April 2011, 11:33
Last visit: 20 April 2011, 12:17