Meet Strike-X Air and Vx Advance Series from Aerocool

Devotees of a futuristic design and uncommon framework cannot but revel in the launch of new chassis Strike-X Air from Aerocool developers. The long-awaited product is already in the market, as well as new Vx Advance series. Chassis Strike-X Air is distinguished by the ultra-original design and open-end framework type. According to the words of Aerocool representatives, the major emphasis has been made on the handiness of usage so that each person could have a direct access to any component of the chassis.



The chassis of Strike-X Air is made of steel and supports motherboards of Micro ATX, E-ATX and ATX dimension type, and graphics cards of 330 mm. length. Expansion cards and interface panels are installed due to the ten slots in the rear part of the device. The chassis is equipped with three external modules of 5.25 and 3.5 inches type. The clipboard is intended for a single USB 3.0 socket, three USB 2.0 sockets, and a couple of 3.5 mm. sockets for headsets with a microphone. … …

MSI Offers H87I AC Motherboard for Demanding PC Builders

MSI has made a pleasing presentation for all builders and enthusiasts who would like to create a small-sized but highly efficient gaming or multimedia system. The MSI H87I AC is designed in mini-ITX form-factor, featuring 170x170 mm dimensions only. The core of the board is Intel H87 Express chipset that supports all Haswell CPUs with LGA1150 socket. According to the latest data, the model is already available in the European market for approximately 102 EUR.



The H87I AC accommodates two DIMM slots, available for the incorporation of DDR3 modules with the maximal frequency of 1600 MHz. The latter might work in a two-channel mode and reach 16 GB capacity. Disk subsystem is organized by means of four SATA III 6 Gb/sec ports, which allow for the creation of diverse RAID configurations (i.e. 0, 1, 5, 10, AHCI).


Expansion is realized due to a single PCI-e 3.0 x16 connector and one mini-PCI-e (half-size) connector for network modules. Network abilities are supported by one …

Inno3D Demonstrates Two GeForce GTX 650 Ti Boost Graphics Cards

As opposed to the army of companies that launched practically identical to the prototype GeForce GTX 650 Ti Boost graphics cards, Inno3D has elaborated two own versions which dramatically differ from Nvidia’s sample. The major difference lies in an efficient cooling system and production overclocking. The first model, marked as Inno3D GeForce GTX 650 Ti Boost iChill, is equipped with a highly efficient cooler ‘iChill’ and features 7% production overclocking. The other model, marked as Inno3D GeForce GTX 650 Ti Boost, comes without overclocked frequencies, although its hardware components promote for the conducting of various clock frequency tests.



Both novels take GK106 as the basis. The GPU is developed under 28 nm technological process and features 768 CUDA cores, 64 texturing blocks, and 16 rasterization blocks. In regard to frequencies, Inno3D GeForce GTX 650 Ti Boost iChill is clocked at 1050 MHz in nominal mode, but can be overclocked up to 1102 MHz in GPU Boost …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 06 May 2012, 19:12
Last visit: 06 May 2012, 19:12