Gigabyte Showcases GA-Z170X Gaming 3 Mainboard

Gigabyte expands its line of gaming products with a new ATX motherboard, entitled GA-Z170X Gaming 3. The key peculiarity ascribed to the model is the support for the latest Intel Skylake-S CPU (14 nm) with LGA 1151 socket. The new-comer takes Intel Z170 chipset as the basis and draws power via 24-pin ATX as well as 8-pin EPS power sockets. Besides, the board belongs to the mainstream customer segment, so its price won’t go higher than $188.



Gigabyte GA-Z170X Gaming 3 is furnished with 7-phase VRM, four slots for DDR4-3400 MHz RAM (two-channel) of up to 64 GB capacity, a pair of PCIe 3.0 x16 slots for the installation of graphics cards (support for CrossFireX and SLI configurations), a single PCIe 3.0 x4 slot, and three PCIe 3.0 x1 slots.


Storage subsystem might be organized due to six SATA III ports (bandwidth – 6 Gb/sec), three SATA Express ports (bandwidth – up to 16 Gb/sec), and a couple of M.2 slots with bandwidth index up to 32 Gb/sec.


In addition, this …

Cooler Master to Continue Its Series of Heatsinks with Vapor Chambers

Cooler Master has lately introduced its new lineup of coolers with the implementation of vapor chambers technology (TPC 812 series). However, the company's plans are not limited to this series only, and the upcoming release of V4 GT series is the most convincing proof of it. The new series will be based on horizontal vapor chamber technology and intended at the colling down of high-end graphics cards.



In accordance with the manufacturer's undertakings and plans, the implementation of this technology will provide for the octuple improvement of heat dispersion as compared with the solid copper-contact sink. This approach towards the processor's colling down enables the involvement of more heat pipes. Nevertheless, V4 GT model will be equipped with only four heat pipes.


Vapor chamber technology stipulates efficient removal of heat from the processor and other integral components. At the same time, it averts the creation of hot spots and promotes for the even distribution of …

The Designer Series of BenQ Monitors Has Been Widened by the 27-inch PD2710QC Model

A new model of BenQ monitors under the PD2710QC codename has recently broadened the Designer line. This novelty, with Animation, Darkroom and CAD/CAM special modes preinstalled, is intended for designers and professionals working with graphics and video.



PD2710QC has an IPS 27-inch LCD panel with the 2560 x 1440 pixels resolution. Its brightness factor is 350 cd/m2, contrast ratio – 1000:1, and the response time – 12 ms. The device covers 100 % of sRGB and Rec.709 sets of colours, as well as supports Flicker-free and Low Blue Light technologies.


Among other peculiarities of this BenQ product one can notice embedded speakers of the total 2 W capacity and a convertible stand, which allows to adjust the height in the 130 mm range and to change the landscape display operation mode into the portrait one.


The interface contains an HDMI, a DisplayPort and a USB-C port.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 09 May 2012, 07:16
Last visit: 09 May 2012, 07:16