Asetek to Finalize the Development of the 4Gen LCS

Asetek, a well-known manufacturer and supplier of water/liquid cooling solutions, announces the final stage in the development of the 4th generation of its patented liquid-cooling system. Currently, the products developed by Asetek are widely used by OEM-companies in their own systems. However, in accordance with the voiced information, the LCS of the fourth generation will be delivered as OEM-product line, so as a brand Asetek product. The prospective release date is scheduled for the end of 2012.

The 4th generation of patented liquid cooling systems features an elaborated waterblock base and totally refined pump. Such improvement might provide for a dramatic increase in performance. The implemented pump creates a higher pressure and more efficiently distributes the liquid current at the entrance to the micro-channel base structure.

At the same time, thermal resistance has been reduced at 20% which resulted in 1.2 times better waterblock heat irradiation properties. …

Xilence Company has presented a kilowatt power supply unit of XQ series

Taiwanese company Xilence released two PSU of unusual design — XQ Series of 750 and 850 W capacities. In contrast to usual offers on the market, these PSU are equipped with a pair of 60-mm fans. It has separate adjustment of speed and can operate in a completely passive mode at a load of up to 20-30%.

Recently, Xilence added to the above-mentioned series a power supply with nominal 1000W. New model in the pre-sale testing was certified with 80 Plus Platinum, which indicates the level of efficiency from 90% to 94% in the system of 230 V. Like its predecessors, the unit uses a modular principle of cabling, active power factor correction mechanism and complies with ATX12V v2.3 and EPS12V v2.92 standards. The list of available power cables (connectors) is the following: 4x PCI-E 6-pin, 4x PCI-E (6 + 2)-pin, 7x Molex 4-pin, FDD, 12x SATA, EPS12V (4 +4)-pin, EPS12V 8-pin and ATX (20 +4)-pin.

Five-year warranty on the Xilence XQ 1000W provides the possibility of replacement the …

Meet Strike-X Air and Vx Advance Series from Aerocool

Devotees of a futuristic design and uncommon framework cannot but revel in the launch of new chassis Strike-X Air from Aerocool developers. The long-awaited product is already in the market, as well as new Vx Advance series. Chassis Strike-X Air is distinguished by the ultra-original design and open-end framework type. According to the words of Aerocool representatives, the major emphasis has been made on the handiness of usage so that each person could have a direct access to any component of the chassis.

The chassis of Strike-X Air is made of steel and supports motherboards of Micro ATX, E-ATX and ATX dimension type, and graphics cards of 330 mm. length. Expansion cards and interface panels are installed due to the ten slots in the rear part of the device. The chassis is equipped with three external modules of 5.25 and 3.5 inches type. The clipboard is intended for a single USB 3.0 socket, three USB 2.0 sockets, and a couple of 3.5 mm. sockets for headsets with a microphone. … …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 31 December 2011, 16:18
Last visit: 31 December 2011, 17:08