Cooltek Rolls Out Thermolab CPU Coolers

Enlisting up support of a well-known German manufacturer PC Cooling GmbH (Cooltek brand), Thermolab brought on the European market a pair of small-sized CPU coolers. Codenamed LP53 and ITX30, the products are differentiated by the depth of the copper plates and the dimensions of the pre-installed fan. Both new-comers are predestined for mini-ITX and micro-ATX platforms with Intel LGA1156/1155/1150 socket and 100 W TDP processors.



The Thermolab LP53 features 100x94x53 mm dimensions and weighs 410 g (including fan). It consists of a copper base, two 6 mm heatpipes, and 7-blade PWM fan of 92 mm dimensional type. The latter is able to rotate within the speed range of 1000 RPM to 2100 RPM, producing up to 27 dB noise. The cooler’s price does not transcend 37 EUR.


In its turn, the Thermolab ITX30 features 100x94x30 mm dimensions and weighs 300 g. It accommodates a copper base, a heatsink, two 6 mm heatpipes, and a single 80 mm PWM fan. It supports a wider speed range – from …

Adata Introduces New Premier-Pro SP310 Solid-State Drives Series

Adata has recently introduced a new series of solid-state drives, entitled Premier-Pro SP310. The series consists of 32 GB, 64 GB and 128 GB models that are developed in mSATA form-factor. The drives feature 50.95x30x4 mm dimensions and are intended to be used as a speedy cache-memory or boot partition in OS for desktop and mobile devices.



Premier-Pro SP310 SSDs employ SATA 6 Gb/sec interface and are based on JMicron JFM-667 controller. The latter ensures that the drives could achieve the highest performance with the outstanding data transfer speeds. Therefore, the maximal sequential Read speed makes up 410 MB/sec, whereas the maximal sequential Write speed – 180 MB/sec. In its turn, the maximal random Read/Write speed reaches up 45.000 IOPS. Such showings are able to guarantee a substantial increase in system response speed.


To continue, the new-comers from Adata support all updated technologies, including NCQ, TRIM and S.M.A.R.T. They enhance the possibilities of the …

The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 14 October 2012, 16:29
Last visit: 14 October 2012, 16:29