EVGA GeForce GTX 660 Ti

Due to the unknown paparazzi the photos of the upcoming graphics card EVGA GeForce GTX 660 T leaked to the Internet. As it can be seen it is made almost on the reference design of Nvidia. The main differences of EVGA board from the reference — design of the casing of the cooling system, the logo on the fan housing and the clock frequency.

The video card is made on the printed circuit board on the PCI Express 3.0 x16 bus and is equipped with a proprietary dual-slot cooler of active type. Its «heart» is created on 28-nm chip with 1344 GK104 CUDA cores and advanced architecture Kepler. On board there is a 2048 MB of GDDR5 memory with 192-bit and a frequency of 6008 MHz. In fact, core graphics core frequency is 980 MHz, and accelerated by the NVIDIA GPU Boost function value is equal to 1023 MHz.

Dimensions of the cooler are the same as the GeForce GTX 670, but the circuit board is expected to be shorter. It is believed that the card uses the GPU GK104-325-A2 analogically to …

Announcement of video card Gigabyte Radeon HD 7970 Super Overclock

The efforts of Gigabyte engineers culminated in the release of the Radeon HD 7970 Super Overclock, also known as GV-R797SO-3GD. This is a monstrous construction with height of 64 mm (3.5 expansion slots) and a cooling system WindForce 5X. As well as preparing to be released GeForce GTX 680 SOC, the new adapter uses a five high-speed (> 4000 rev / min) fan size of 40 mm, copper evaporation chamber, and five copper heat pipes.

WindForce 5X – is one of the most expensive VGA-coolers, except for models with water blocks and liquid cooling system. It will allow to overclock Gigabyte GV-R797SO-3GD up to frequencies of 1155/7620 MHz. However, neither the temperature nor the noise performance of video card can be considered satisfactory: 85 degrees under load and 91 ° C for overclocking with increased voltage, and 8000 rpm in a heavy-duty (1185 MHz, 1.375 V) explains the situation.

Printed circuit board Radeon HD 7970 SOC is reinforced with five polymer capacitors NEC / …

PSU Enermax Platimax 850W Review

Platimax series belongs to the top line of power supply units designed by Enermax. The series includes seven models, ranging from 500W to 1500W power, which are characterized by the operational temperature scope from 0 to 50 degrees and the correspondence to 80Plus Platinum standard. Model Platimax 850W (codename EPM850EWT) is a worthy ambassador of the whole production line, due to its reliable, stable and efficient work.

General Specifications

Enermax Platimax 850W unit is developed with the employment of high-quality Japanese capacitors that ensure stability of operation on any work mode. Its design resembles a lot the one seen in Revolution87+ PSU series, although instead of yellow, Platimax uses gray color in combination with a black one. The unit is housed in a fingerprint- and scratch-proof case with a frosting finish. One of the side panels features a conspicuous Platimax logo that adds supremacy to the model. The frontal panel accommodates On/Off switch and a …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 16 September 2012, 06:38
Last visit: 16 September 2012, 06:38