Sapphire Introduces Edgy R9 290 Vapor-X OC Graphics Card

Sapphire Technology Ltd., the first-string supplier of graphics cards based on AMD chips, introduces its proprietary version of Radeon R9 290 adapter – R9 290 Vapor-X OC. As seen from the title, the model features an original Vapor-X cooler with three low-noise fans and has received factory overclocking. Bright design and outstanding performance makes this card a desirable acquirement for enthusiasts and overclockers.



Sapphire R9 290 Vapor-X OC is based on Hawaii PRO GPU (28 nm, GCN architecture) with 2560 stream processors. It runs at 1030 MHz frequency. The chip is accompanied by 4 GB of GDDR5 memory (512-bit interface) that operates at 5600 MHz effective frequency. The card is developed for PCI Express 3.0 x16 rail and is powered through a pair of sockets: 1x 8-pin and 1x 6-pin.


The award-winning Vapor-X cooler consists of an evaporator and five heatpipes. The main heat-pipe features 10 mm diameter, two other – 8 mm, and the last two – 6 mm. This combination is …

G.Skill Showcases New RAM Memory Modules TridentX DDR3

Long-awaited Computex 2013 has brought to light the whole galaxy of innovative hardware ideas. RAM market has also replenished with new entries, partially due to G.Skill International. Its new RAM modules, codenamed TridentX DDR3, are an embodiment of utmost performance, reliability and compatibility. The new-comers have been developed to support the latest Intel’s Haswell-based CPUs i3/i5/i7, integrated into Intel Z87 Express chipset.



TridentX DDR3 are introduced by sets of two and four 240-contact DIMM modules, the total capacity of which achieves 8 GB, 16 GB and 32 GB. All of them are equipped with original in design heatspreaders. They are also known to support Intel XMP overclocking profiles and to operate at 1.65 V power voltage.


Detailed Specifications


TridentX DDR3-3000 modules will be available in 4x8 GB kits (32 GB). Their effective frequency showings make up 3000 MHz with 12-14-14-35 latencies.


TridentX DDR3-2933 modules will be available in 2x4 …

Aerocool Intros Dead Silence System Fans

Aerocool Advanced Technologies is going to launch a new lineup of 140/120 mm system fans, entitled Dead Silence. As seen from the title, the products are distinguished by absolutely noiseless operation. However, this is not the only attraction. The lineup is introduced by bicolor models with black frames and white/blue/red/black mounting components. Four onboard LED backlight add to the fans’ aesthetic effect.



All the fans are designed on a hydrodynamic bearing that is able to run approximately 100.000 hours on end. All of them are connected to the motherboard by means of a 3-pin connector. The blades are made of two different materials (rubber and plastic), whereas their reverse side features a dedicated Fish-eye design. It provides for the minimization of turbulence. Moreover, four rubber clamps on the frame’s edges terminate the vibration and noise.


To proceed with the peculiarities, Aerocool Dead Silence fans of 120 mm dimensional type rotate at the maximal 1200 …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 21 July 2012, 15:27
Last visit: 04 October 2012, 09:32