Meet New Motherboard from Biostar: Hi-Fi Z87W

Biostar is ready to launch its newest motherboard that is notable for the support of Windows 8.1 OS platform and availability of Windows Hardware Quality Labs certificate. Entitled Biostar Hi-Fi Z87W, it features a standard ATX form-factor and is relied on Intel Z87 Express chipset. Thereby, the board is ready to accommodate LGA1150 Intel Core processors (Haswell architecture).



The motherboard houses four slots for the installation of DDR3 memory modules that run at the maximal 2600 MHz (up to 32 GB). Power subsystem is organized according to 8-phase scheme to provide enough power to the CPU and other key components. Expansion facilities are secured by means of two PCI slots, the same number of PCI-e 2.0 x1 slots, one PCI-e 2.0 x16, and one more PCI-e 3.0 x16 slot. Storage facilities are represented by six SATA III 6 Gb/sec ports, which can be combined into diverse RAID configurations.


Gigabit Ethernet port takes responsibility for network connectivity, while Power, Reset …

LEPA to Release MX-F1 and MaxGold 1000 PSUs

LEPA is ready to release a new series of entry-level power supply units entitled MX-F1. The series counts three models of 400 W, 500 W and 600 W capacity: N400-SA-EU, N500-SA-EU and N600-SA. In addition, the company has expanded its MaxGold line with a flagship 1000-watt model. It corresponds to Intel ATX12V 2.4 standard and employs an optimized hardware design.



To begin with, MX-F1 PSUs offer 87% of ultimate efficiency. Operating at 20%/50%/100% loading, they are able to achieve 82%/85%/82% efficiency correspondingly. Nonetheless, the models cannot receive 80Plus Bronze certificate, since they feature limited voltage input range. All the models within the series employ a single +12V rail and boast a non-modular design.


This promotes for the connection of middle-efficiency components. They support Active PFC and a wide spectrum of protective functions (over-voltage, over-current, over-power, short-circuit). Cooling of internal components is ensured by a single 120 mm fan. …

The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 05 January 2012, 01:43
Last visit: 12 January 2012, 00:14