Motherboard MSI FM2-A85XA-G65A Review

Military-class motherboards elaborated by MSI have been always distinguished by the implementation of all high-end components within supply circuits, by extended overclocking facilities, and by corresponding exterior design. FM2-A85XA-G65A model corroborates such outstanding descriptions, being a worthy representative of products branded as ‘Military’. Moreover, the integration of high-quality and solid hardware elements enhances its overclocking potential that can’t but gladden PC enthusiasts.

Design and Layout

MSI FM2-A85XA-G65A is developed in ATX form-factor. It is notable by a fanciful, spacious layout, taking into account the full-fledged options integrated within a single chipset. Thus, there is no need in additional controllers. The distance between two graphics slots has been doubled to organize even the most powerful CrossFire configurations. The integrated heatsinks feature 31 mm height; one of them is located only 5 mm far from CPU socket. This implies …

Enermax Outs High-Flown Twister Pressure Fan

One of the major requirements for an efficient CPU cooler is a high static pressure. The higher this index is, the more productive the blades are. Quite the contrary, the main requirement for a system fan is a volume of produced airflow, since it affects the air circulation within the case. Taking into account those facts, Enermax decided to elaborate a fan that would unite both demands. That is how Twister Pressure fan came into the market.

Enermax Twister Pressure is a high-efficiency fan targeting to be implementing within CPU cooling solutions. It is based on Twister Bearing 2, which framework has been optimized for a reliable operation under unfavorable thermal conditions (up to 85 degrees) and under high dust content. The second version of Twister Bearing is supposed to run over 160.000 hours in fail-proof mode; this is 60% more than the initial version could perform.

To continue, this fan offers three operational modes: Performance, Silent and Ultra Silent. All of …

Deepcool to Release Neptwin V2 CPU Cooler

Deepcool Industries Co. LTD has enriched its production line with a new CPU cooler, entitled Neptwin V2. Featuring 125x136x159 mm dimensions, the model allows for the installation of up to four fans, combined with a nickel-plated base, six copper heat pipes and a two-section voluminous heatsink which consists of 80 ribs (40 ribs for each section).

This cooler is known to support all up-to-date platforms, developed by Intel and AMD. As distinct from the majority of rivals, the Neptwin V2 framework is ready to accept four fans which operate by means of PWM technology. The base version comes with only two fans. The first one – Deepcool Wind Blade 120 – is equipped with a blue backlight; its rotational speed range varies from 900 to 1500 RPM. The second fan rotates at 1300 RPM. An overall noise level fluctuates within 21.4-32.1 dB boundaries.

It should be mentioned that total airflow volume produced by the fans might achieve 110.8-237.15 m/h. As a result, the cooler is …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 12 October 2012, 14:26
Last visit: 12 October 2012, 14:44