Adata to Launch Budgetary SSD SP600 Series

Adata has lately announced the launch of a new SSD series codenamed SP600. The drive will supplement the company's line of budgetary solutions but will feature high-end specifications. SP600 is going to have SATA III interface with the throughput capacity of 6 Gb/sec. The series will house NAND MLC flash-memory chips and JMicron JMF661 controller.




This way, Adata aims to attract customers who require outstanding performance but, at the same time, who cannot afford buying too expensive drives. In addition, this model will suit those people who would like to transit their systems from traditional hard drives to more efficient SSD solutions.


Adata SP600 will be delivered in three volume capacities, — 32GB, 64GB, and 128GB – which will be developed in 2.5-inch form-factor. All models provide for the reduction of OS loading time and the increase of overall system speed, if compared with standard HDD performance. These SSDs ensure the data transfer speed at levels of 360 …

HIS Adds 7770 iCooler to Its Graphics Cards Arsenal

A new graphics card of an average efficiency has appeared in the arsenal of HIS manufacturers. Codenamed HIS 7770 iCooler (H777FN1G), the card is targeted those gamers who would like to receive a dual effect: the possibility to play all up-dated games and to satisfy all other graphics requirements for a reasonable price.



Model 7770 iCooler is based on AMD Cape Verde TX GPU, developed under 28 nm technological process and built on Graphics Core Next micro-architecture. It involves ten computing blocks and 640 current processors. The processing unit is expected to operate at the reference 1000 MHz clock frequency. The integrated GPU is accompanied by 1GB of GDDR5 memory which employs 128 bus; its nominal clock frequency starts at 1125MHz, while its effective frequency might achieve the margin of 4500MHz.


HIS 7770 iCooler employs PCI Express 3.0 x16 internal interface. A set of external video interfaces consists of HDMI, D-Sub and Dual-DVI ports that are able to ensure the …

The Compulab IPC3 Mini-PC with Passive Cooling Goes for 693 USD

One of the latest products by Compulab is an IPC3 mini-PC, intended for industrial and commercial use. The lowest price of the basic model is 693 USD.



Outside dimensions of the framework are 160 х 190 х 40 mm. Due to its exterior construction the case provides overall passive cooling.


There’s a possibility to install 32 GB of RAM, a 2.5” storage drive, an M.2 2260 SSD and a couple of devices with an mSATA connector. The novelty features wireless interface adapters along with two USB 2.0, four USB 3.0, two Gigabit Ethernet, a DisplayPort 1.2, an HDMI 1.4a and an S/PDIF ports. However, special modules will be able to extend this set of connectors.


The Compulab IPC3 Mini-PC operates an Intel Kaby Lake CPU and is protected by the five-year manufacturer warranty.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 23 November 2012, 23:12
Last visit: 24 November 2012, 07:51