Greeting Asus Maximus VI Formula Gaming Motherboard

Asus is going to put on sale its newest LGA1150 motherboard of ROG (Republic of Gamers) series, entitled Maximus VI Formula. The board features ATX form-factor and is based on Intel Z87 chipset that supports all Haswell-based Intel Core processors. The most peculiar thing about the new-comer is the availability of ROG Armor enclosure that covers the PCB on both sides. The top cover is made of ABS; it prevents the heat produced by the surrounding components (i.e. graphics adapters) from warming up the CPU and VRM systems. The rear cover is made of SECC steel that stops the PCB from bending.

Motherboard Maximus VI Formula houses four DIMM slots that support up to 32 GB dual-channel DDR3 memory modules with up to 3100 O.C MHz frequencies. 8-channel VRM system consists of NexFET transistors, Black Wing throttles, and high-efficiency solid-state capacitors. All power components are cooled down by a dedicated heatsink that is a part of a liquid-cooling system. This motherboard model …

Mushkin Showcases New Reactor Solid-State Drives

Mushkin Enhanced is about to launch a new series of top-tier SSDs within the framework of Reactor series. The series, represented by three models of 256 GB, 512 GB and 1 TB capacity, is targeting up-to-date gaming and high-performance systems. The greenhorns are developed in 2.5-inch form-factor with 7 mm thickness only and SATA III 6 Gb/sec interface.

Mushkin Reactor drives take Silicon Motion SM2246EN controller in cooperation with MLC NAND flash-memory as the basis. Their utmost sequential data transfer speed equals to 560 Mb/sec and 460 Mb/sec on Read/Write operations respectively, while random data transfer speed achieves 74.000 IOPS and 76.000 IOPS correspondingly.

The triple is thought to operate 1.5 million hours without failures in rather tough conditions (in working environments with up to 70 degrees temperature). All models support TRIM instructions, DevSleep mode that prolongs standalone operation of a mobile device on battery power supply, and the newest …

Antec Announces Classic P70 PC Case

Antec, a well-known multi-profile hardware designer, is about to release its newest mid-tower case, entitled P70. The model attracts attention by a strict classic design with a solid steel framework, polycarbonate coating, and low noise level. Featuring 458x205x465 mm dimensions, it supports as mini-ITX/micro-ATX mainboards, so full-format ATX ones. The recommended retail price will probably make up $70.

Antec P70 comes with two external 5.25-inch bays, one external 3.5-inch bay as well as four 3.5/2.5-inch internal bays for HDD/SSD. Expansion facilities are backed by seven slots. It should be underlined that all drives and cards might be installed without accessory tools due to the implementation of a tool-free mounting system. With flexibility of application in mind, HDD bays are rotated 90 degrees.

The case is able to accommodate graphics cards of up to 380 mm in length, ATX power supply units, and CPU coolers of up to 170 mm in height. Top I/O panel cannot boast any …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 April 2012, 16:55
Last visit: 03 April 2012, 20:06