Announcement of video card Gigabyte Radeon HD 7970 Super Overclock

The efforts of Gigabyte engineers culminated in the release of the Radeon HD 7970 Super Overclock, also known as GV-R797SO-3GD. This is a monstrous construction with height of 64 mm (3.5 expansion slots) and a cooling system WindForce 5X. As well as preparing to be released GeForce GTX 680 SOC, the new adapter uses a five high-speed (> 4000 rev / min) fan size of 40 mm, copper evaporation chamber, and five copper heat pipes.



WindForce 5X – is one of the most expensive VGA-coolers, except for models with water blocks and liquid cooling system. It will allow to overclock Gigabyte GV-R797SO-3GD up to frequencies of 1155/7620 MHz. However, neither the temperature nor the noise performance of video card can be considered satisfactory: 85 degrees under load and 91 ° C for overclocking with increased voltage, and 8000 rpm in a heavy-duty (1185 MHz, 1.375 V) explains the situation.


Printed circuit board Radeon HD 7970 SOC is reinforced with five polymer capacitors NEC / …

ASRock Unleashes Hyper OC Series of Overclocking-Oriented Mainboards

ASRock is thought to be an innovator in the development of hardware know-hows. The Computex 2016 came as no exclusion: the company introduced a lineup of overclocked mainboards which joined Hyper OC series. Initially, the lineup consisted of three models – H170 Pro4/Hyper, B150M Pro4/Hyper & H110M-DS/Hyper; further on, it will be replenished by three other models – Fatal1ty H170 Performance/Hyper, Fatal1ty B150 Gaming K4/Hyper & B150A-X1/Hyper.



As seen from the codenames, the motherboards are based on Intel B150, H170 and H110 chipsets which employ ASRock Hyper BCLK Engine controller; it overclocks Intel Skylake CPUs by means of BCLK alteration, without dislocating other components. The new-comers support the installation of superfast DDR4 RAM, graphics cards with PCI-e 3.0 x16 interfaces as well as voluminous drives (including Ultra M.2).


ASRock H170 Pro4/Hyper features the following specifications:

— chipset: Intel H170;

— memory: 4x DDR4;

— storage: …

ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 23 January 2012, 18:51
Last visit: 23 January 2012, 18:51