Three New Nettop Models of NanoPC Series from Foxconn

Foxconn Electronics introduces three new nettops which replenish NanoPC 7000 series. All three, NanoPC AT-7300, NanoPC AT-7500 and NanoPC AT-7700, are claimed to be practically noiseless due to the improved integration and layout base. As scheduled by Foxconn, all the models will become available in March 2013 and will be priced at $390, $480, $600 correspondingly.



These nettops are based on Intel Ivy Bridge platform but are equipped with a bit different CPUs. Thus, NanoPC AT-7300 model accommodates Intel Core i3-3217U processor that operates at 1.8GHz clock frequency; NanoPC AT-7500 model houses Intel Core i5-3317U processor with 1.7GHz clock frequency; NanoPC AT-7700 takes Intel Core i7-3517U processor with 1.9Ghz frequency as the basis.


The integrated motherboard complies with a mobile chipset Intel HM76 Express and features Intel HD Graphics 4000 graphics core. Internal layout of all nettops presupposes the installation of 16GB DDR3 RAM and of additional HDD/SSD drive …

MSI Releases an Affordable Motherboard of Micro-ATX Form-Factor

Right after the release of FM2-A75MA-P33 motherboard, MSI has taken a decision to design one more model for AMD Trinity platform. Codenamed MSI FM2-A85XMA-E35, a new model is based on a more efficient chipset – AMD A85X. This motherboard is a typical representative of entry-level solutions, though can boast a number of attractive facilities.



MSI FM2-A85XMA-E35 is developed in micro-ATX form-factor for Socket FM2 CPU sockets. The model is known to support AMD A and Athlon II processors. This board accommodates two DIMM slots for the installation of DDR3 memory modules, the overall volume of which can rise up to 32GB. The supported memory operating frequencies might vary: DDR3-1066 MHz, 1333MHz, 1600 MHz, 1866 MHz, and 2133 MHz. Power subsystem features a rather unpretentious framework and consists of five phases; thus, this model isn't intended for overclocking purposes.


Expansion facilities implemented in MSI FM2-A85XMA-E35 can be found in any other entry-level …

Sapphire Launches Nitro R9 Fury 4G HBM Graphics Card

Sapphire, a well-known manufacturer of top-notch graphics solutions, is glad to announce the launch of a new high-performance video card, entitled Nitro R9 Fury 4G HBM. The greenhorn is available in two modifications which differ by GPU clocks (AMD Radeon R9 Fury). The first version offers 1050 MHz frequency, while the second version runs at 1020 MHz frequency. As a reminder, the etalon Fiji Pro GPU operates at 1000 MHz.



Sapphire Nitro R9 Fury 4G HBM rests upon an improved PCB with an enforced VRM and high-quality hardware base. The card employs 4 GB of GDDR5 memory with 512-bit bandwidth. The list of integrated interfaces consists of three DisplayPort connectors, one HDMI port and one DVI-D port. Moreover, the model is shipped with a proprietary Sapphire TriXX utility that allows for fine tuning of all key parameters.


As distinct from the etalon model, the modified graphics card from Sapphire boasts Tri-X cooler. It embraces three fans on ball bearings and 10-mm …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 16 May 2012, 22:48
Last visit: 16 May 2012, 23:13