Căutați drivere de ID-ul sau numele dispozitivului

Aparate de cunoscute:165022367

Ultimul cunoscut driver: 23.12.2020

Ad

Новости devid.info

Here Comes the 2nd Generation of Enermax Revolution X’t PSUs

Following the success of Revolution X’t series of power supply units, Enermax has introduced the second generation of revolutionary solutions: the Revolution X’T II. The series counts four models of 160x150x86 mm dimensions, each complying with 80Plus Gold certificate (up to 92% efficiency level). All the new-comers are able to operate in a wide voltage range (100-240 V) to meet the requirements of different PC platforms.

Enermax Revolution X’t II units come equipped with a single +12V rail with high output capability, high-end Japanese electrolytic capacitors, DC-to-DC converters as well as other reliable hardware. The chassis is cooled down by 139-mm fan, based on patented Twister bearing; consequently, the fan is estimated for 160.000 hours of fail-safe activity.

In order to reduce the end price of the models, Enermax has implemented hybrid cabling: key cables are connected to the chassis, while accessory cables might be detached when unnecessary. The units support 2013 ErP Lot 6 standard, Active PFC technology, a series of safety mechanisms (UVP, OPP, OCP, SCP), Heatguard technology that maintains the rotation of a fan during 30-60 seconds after shut off, CordGuard technology that fixes the power cable securely.

To continue, each unit in the series features the following specifications:
— Revolution X’t II 450 W: peak power – 495 W, current rate – 3.5-7 A, output capacity of +3.3/5 V rails – 100 W, output capacity of +12V rail – 444 W;
— Revolution X’t II 550 W: peak power – 605 W, current rate – 4-8 A, output capacity of +3.3/5 V rails – 110 W, output capacity of +12V rail – 540 W;
— Revolution X’t II 650 W: peak power – 715 W, current rate – 5-10 A, output capacity of +3.3/5 V rails – 110 W, output capacity of +12V rail – 636 W;
— Revolution X’t II 750 W: peak power – 825 W, current rate – 5-10 A, output capacity of +3.3/5 V rails – 120 W, output capacity of +12V rail – 744 W.
  • 0
  • 24 February 2016, 14:24
Only registered users can comment.