Enermax to Announce a New Mid-Tower Case Fulmo ST

Enermax Technology, an established Taiwanese developer of various PC hardware components, is about to announce its new roomy PC case within the boundaries of Fulmo series. Codenamed Fulmo ST, the case is designed in mid-tower form-factor and is distinguished by massy dimensions. Featuring 485x244x513 mm, the product’s weight approximates 8.2 kg. The novice will be available in two color variations: gray (ECA3270A-G-BL) and black (ECA3270A-B-BL).



Fulmo ST is ready to accommodate up to eight PCI expansion cards, three 5.25-inch drives and eight drives either of 3.5- or 2.5-inch standard. The case is compatible with ATX and micro-ATX motherboards, quite lengthy graphics cards (up to 412 mm if demounting the top HDD/SSD bay), as well as rather lengthy dual-heatsink for the water-cooling system (up to 280 mm). The latter might be replenished by ten fans of either 120 mm or 140 mm dimensional type.


Upon the whole, Enermax will deliver its Fulmo ST case with three …

OCZ Announces the Release of Agility4

OCZ company representatives have proudly announced the release of their new SSD child of Agility 4 series. Agility4 series embraces four models which correspond to the 64 GB, 128 GB, 256 GB, and 512 GB volume capacity parameters. Agility4 developers claim that their new series is the balance of performance, speed and reliability at the same time.



The new series is based on Indilinx Everest 2 controller and is equipped with SATA III interface. SSD Agility4 is built on flash-memory chips of MLC NAND type which are destined to sustain up to 2 million hours of fail-proof operability. These chips support TRIM and SMART technologies and are sure to involve ECC option to monitor and remove all detected errors. The other peculiar feature of Agility4 SSDs is the availability of DRAM cache-memory of 1 GB volume capacity. In addition, SSDs have an integrated option of automatic encoding according to AES algorithm.


It should be mentioned that each individual model in a series proves …

ECS Develops Haswell-Compatible Motherboard Z87H3-A2X Extreme

At the cusp of an official release of Intel’s fourth generation processors each hardware designer tries to elaborate new Haswell-compatible components. Motherboard manufacturers are probably the ones to introduce the lion’s share of such products. ECS is not an exception. According to the data provided by a reputable source, ECS is soon going to release its newest prime-class board codenamed Z87H3-A2X Extreme. The first meeting with the new-comer is planned within the boundaries of Computex 2013 exhibition taking place in June.



As seen from the codename, ECS Z87H3-A2X Extreme is based on Intel Z87 Express chipset covered by a black-and-red heatsink. The model employs full-sized printed circuit board, Socket LGA1150, and 12-phase VRM for CPU power supply with gold-plate solid-state capacitors. Power subsystem elements are cooled down by a voluminous CoolTech V heatsink. This heatsink is connected with a chipset one by means of a nickel-plated copper heat pipe.


To …
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Acer, inc. Aspire 3680 based on Acer, Inc. Prespa1

  • BATTERY
  • COMPUTER
  • DISPLAY
  • HDC
  • KEYBOARD
  • MEDIA
  • MOUSE
  • MTD
  • NET
  • PCMCIA
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME