Cooler Master N300 and N500: PC Cases of Medium Price Tier

Cooler Master announces a release of two new PC cases of mid-tower form-factor. Codenamed N300 and N500, the couple belongs to the medium price tier products and is differentiated by a laconic design combined with a thoughtfully elaborated cooling. Each model features a totally black coating and grid-like frontal panel. In retail market these cases will be offered in two framework variations: with blind side panels and with a large transparent window on one of the panels.



Both models are thought to support motherboards of standard ATX and micro-ATX dimensional type. The most notable peculiarity is the cooling system that primarily consists of two pre-installed 120 mm fans (in the frontal and rear parts of the case); however, this pair might be easily supplemented by seven (with blind construction) or five (with windowed construction) fans more. Moreover, there is a feasibility of incorporating a liquid-cooling system. Some key specifications of both novices are featured below.

‘Cubic’ Chassis Corsair Carbide Air 540 Review

Corsair is renowned for the whole galaxy of products designed for contemporary PC platforms. Its PSUs, memory modules, SSDs, cooling solutions, peripherals, and cases are widely incorporated in desktop and mobile segments. The latter count a list of series, targeted various customers with various needs. The most peculiar one is Carbide series that currently consists of eight models. Carbide Air 540 differs from its comrades, in the first place, by its cubic framework and, in the second place, by its mini-tower height but midi-tower internal spacing. Those are not the only attractions of the model, since Corsair always offers more than it’s seen on the surface.



Design and Ergonomics


Corsair Carbide Air 540 features 458x322x419 mm dimensions and is distinguished by a rather strict design. Exterior and interior facets are totally painted black, except for ‘Corsair’ label and sockets with inscriptions. The case is made of thin steel but for the external plastic panels …

MSI B75IA-E33 - cost-effective Mini-ITX board for processors Ivy Bridge

In early August, it was mentioned about the fact that MSI developer of motherboards is preparing to release three new products in the form factor Mini-ITX on chipsets A85, B75, and Z77. As it turned out, the first low-cost board will be MSI B75IA-E33 — it will start selling in Europe at the end of this week at prices ranging from € 95.



The functionality of this product is limited with respect to the other two models; however, a set of components in B75IA-E33 is very decent. LGA1155 processor socket is energized by three phases (provides additional power to the ATX12V 4-pin), hidden under a small cooler chipset Intel B75. Available one connector PCI Express 3.0 x16, two slots for memory modules DDR3-1066/1333/1600 total up to 16 GB, SATA port 6Gb / s and SATA 3 Gbit / s (3 units) to connect storage devices.


A pair of USB 3.0 on the rear panel are completed with a 19-pin connector on the PCB, through which on the front panel I / O can be taken two SuperSpeed USB. The …
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Gateway E-4000 based on Intel Corporation D845GRG

  • COMPUTER
  • FDC
  • FLOPPYDISK
  • HDC
  • MEDIA
  • NET
  • PORTS
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME