EK to Start Selling FC7970 Matrix Waterblock in Early March

EK Water Blocks is about to put on sale its VGA waterblock, designed specifically for Asus ROG Matrix HD 7970 graphics card. Codenamed EK-FC7970 Matrix, the product will become available in retail sale already on 8 March and will cost approximately €110. Such price is justified by the utmost heat management facilities that ensure 100% percent reliability.



EK-FC7970 Matrix belongs to the echelon of waterblocks with full coverage. Its base is made of nickel-plated copper, its rear backplate – of anodized aluminum, and its lid – of acetal. The model shows compatibility with all standard fittings of G1/4 dimensional type.


It should be mentioned that EK Water Blocks furnished its new creation with all necessary fastenings, a backplate, and a mounting plate; the latter takes only two slots, unlike a nominal Asus ROG Matrix HD 7970 plate which takes three slots. Such switch of plates will be useful on simultaneous installation of several expansion cards.


This …

Kingston and Adata Come up with M.2 SSDs

Within the framework of Computex 2014 both Kingston and Adata are going to introduce their fresh SSD series of M.2 form-factor. In keeping with the manufacturers’ words, the products – SM2280S2 and SR1020NP — are differentiated by some spectacular performance. At present the companies provide only basic info about the drives, leaving their fans in suspense.



Kingston SM2280S3 is based on Phison PS3108 that supports SATA 6 Gb/sec interface only. It ensures 540 MB/sec and 514 MB/sec speed on sequential Read/Write operations. For sure, it’s not the performance innovative M.2 drives should demonstrate (about 10 Gb/sec), although the model considerably surpasses traditional HDDs in this respect.


This SSD series is represented by three models of 120 GB, 240 GB and 480 GB capacity. All of them employ DDR3 cache-memory with the minimal 256 MB capacity. Besides, the difference in efficiency between other M.2 offers Kingston promises to compensate by a more affordable price.

The new version of the chassis from Zalman Z9 Plus

The company Zalman continues to utilize the design of the whole successful chassis Z9, releasing a new model Z9 Plus D4-U3. Perhaps, the only difference from the recent Z9 U3 is the lower part of the front panel, made in the form of letter D.



The list of applied characteristics has remained the same. The body is made of steel and plastic in the form factor Mid-Tower. Its dimensions are 504 (L) x 207 (W) x 464 (H) mm, weight — a little over 7 lbs. Inside can be placed the motherboard ATX or microATX, seven cards PCI-E expansion up to 290 mm, ATX-compatible power supply, three optical drives, and seven hard drives, including two SSD 2.5 format.


The set includes two 120-mm fan — in front with the LED-backlit display and on the back without it. On the input-output is a small information display, two USB 3.0 ports and USB 2.0, Mini-Jack connectors for headphones and microphone.


Zalman Z9 Plus D4-U3 will debut in Japan and perhaps in some other markets, August 19 at a …
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

TOSHIBA Portable PC

  • 1394
  • BATTERY
  • CDROM
  • COMPUTER
  • DISKDRIVE
  • DISPLAY
  • FDC
  • FLOPPYDISK
  • HDC
  • KEYBOARD
  • MEDIA
  • MODEM
  • MONITOR
  • MOUSE
  • NET
  • OTHER DEVICES
  • PCMCIA
  • PORTS
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME
  • VOLUMESNAPSHOT