New Budgetary Chassis K380 from Cooler Master

Cooler Master announces the release of a new entry-level chassis K380 (RC-K380-KWN1). This model will replenish the K Series of products and will feature mid-tower parameters (209x445x479 mm overall dimensions). K380 is basically intended at gamers, due to an eye-catching design: the chassis is housed in a solid casing made of steel and plastic with some aggressive inclusions and details. However, the major distinctive peculiarity ascribed to the newbie is its moderate price that will not exceed the border of $80. Affordability affirms Cooler Master's image of the company that skillfully combines high-quality with alluring prices.



The chassis is painted black from the inside and outside and accommodates a metallic grid on the frontal panel. Its side panel is notable by the availability of a large transparent window that showcases internal layout. In its turn, internal spacing is sufficient to locate motherboards of ATX and micro-ATX form-factor, graphics cards of 316 mm in …

Antec Announces Classic P70 PC Case

Antec, a well-known multi-profile hardware designer, is about to release its newest mid-tower case, entitled P70. The model attracts attention by a strict classic design with a solid steel framework, polycarbonate coating, and low noise level. Featuring 458x205x465 mm dimensions, it supports as mini-ITX/micro-ATX mainboards, so full-format ATX ones. The recommended retail price will probably make up $70.



Antec P70 comes with two external 5.25-inch bays, one external 3.5-inch bay as well as four 3.5/2.5-inch internal bays for HDD/SSD. Expansion facilities are backed by seven slots. It should be underlined that all drives and cards might be installed without accessory tools due to the implementation of a tool-free mounting system. With flexibility of application in mind, HDD bays are rotated 90 degrees.


The case is able to accommodate graphics cards of up to 380 mm in length, ATX power supply units, and CPU coolers of up to 170 mm in height. Top I/O panel cannot boast any …

ASRock Debuts with a Couple of E3V5 Mainboards

Following the success of Intel Xeon E3-1200 v5 CPUs, ASRock decided to launch a couple of compatible ATX motherboards. The Fatal1ty E3V5 Performance Gaming/OC and E3V5 WS models both feature Intel C232 chipset. The first new-comer is targeting gamers, while the other one is called to satisfy the needs of fastidious enthusiasts.



ASRock Fatal1ty E3V5 Performance Gaming/OC comes equipped with 4 DIMM slots which support DDR4-2133 MHz memory modules. The inventory also includes Super Alloy design as well as Gaming Armor, Hyper BCLK Engine, F-Stream, Key Master, DDR4 Non-Z OC technologies.


ASRock E3V5 WS accommodates six SATA III ports, a pair of PCIe 3.0 x16 expansion slots, 8-channel Realtek ALC892 audio, Intel I219LM gigabit Ethernet controller, and a variety of external interfaces: four USB 3.0 ports, two USB 2.0 ports, two PS/2, one RJ-45, and three audio ports.


The only drawback of both motherboards is absence of video ports. Thus, it’s vital to complement them with …
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code

TOSHIBA Portable PC

  • BATTERY
  • CDROM
  • COMPUTER
  • DISKDRIVE
  • DISPLAY
  • HDC
  • HIDCLASS
  • INFRARED
  • KEYBOARD
  • MEDIA
  • MODEM
  • MONITOR
  • MOUSE
  • NET
  • OTHER DEVICES
  • PCMCIA
  • PGR1394B
  • PORTS
  • PROCESSOR
  • SYSTEM
  • TSDHD
  • USB
  • VOLUME