Intel is preparing a new motherboard on chipset Z77 and Z75

Intel Corporation has a rather wide range of motherboards for processors Core i5/i7-3000 (Ivy Bridge), but, nevertheless, continues to produce products based on chipsets 7-Series. According to reports, the release of two motherboards Intel LGA1155 — DZ77GAL-70K is planned soon with code-named Gasper Light and DZ75ML-45K (Middle Lake). The first model uses a set of system logic Z77, second — Z75. Both models will receive a certificate of Windows 8 WHQL, support of Fast Boot technology and Lucid Virtu MVP.



Model Intel DZ77GAL-70K is based on the same PCB, as the previous DZ77GA-70K (Gasper) and DZ77RE-75K (Roads End). In contrast to the board DZ77GA-70K, new doesn’t have a rich set of delivery: WiDi-compatible adapter with an antenna, Bluetooth, remote panel with two USB 3.0 ports and a mouse pad Intel Extreme Series. Due to this, it will be cheaper than DZ77GA-70K.


In turn, Intel DZ75ML-45K (Middle Lake) is a compromise models between the DZ77SL-50K and DH77KC. This …

ASRock Outs N3150DC-ITX Mainboard

ASRock has gladdened all devotees of small-sized, power-efficient & sustainable PC/multimedia systems by the introduction of a mini-ITX motherboard, entitled N3150DC-ITX. The model comes equipped with a 4-core Intel Atom N3150 CPU, running at 1.6 GHz basic frequency with the possibility to overclock up to 2.08 GHz frequency. Its key privilege is a sparing TDP level – 6 W only.



ASRock N3150DC-ITX boasts a totally passive cooling: the PCB houses a noiseless heatspreader without a fan. Memory subsystem is represented by two SO-DIMM slots which support the installation of DDR3/DDR3L-1600 MHz modules. The PCB teases only top-tier hardware components, including solid-state capacitors, ELNA audio caps, etc.


Storage might be organized due to a pair of SATA III 6 Gb/sec ports and the same number of SATA II 3 Gb/sec ports. A single PCI-e 2.0 x1 slot is intended for an expansion card, while mini PCI-e Express slot – for a wireless network interface module.


Audio subsystem …

Computer Case be quiet! Silent Base 600 Overview (Part II)

Internal structure

The motherboard compartment is located above the power supply unit. In this regard, everything is quite standard for a Mid Tower class. A large cutout is made in a tray behind a CPU socket, to allow installation of a CPU cooling system directly into the case; a backplate mount (thrust-pad located on the back side of the motherboard) is used for this purpose.


The four large slots in a tray, equipped with the silicone membrane, are designed for proper cable management which looks very promising here. Plugs of expansion slots are attached by thumbscrews. The front part holds a hard disks’ basket for three drives.


At the back side a slot in a tray can be clearly seen to access cable management system slot. Also, the rear side contains two tool kits for installation of solid-state drives and size 2.5" hard disks.


The side cover is made of 0.7 mm steel, and from the inside has a thick vibration and noise absorbing coating. The recess in the …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 24 June 2011, 10:24
Last visit: 24 June 2011, 10:24