Lian Li PC-B12 - Aluminum chassis for silence devotees

Lian Li engineers have decided to diversify the range of branded chassis with “quiet” PC-B12. This Mid-Tower model is designed in such a way as to minimize the noise coming from the system unit. To do this, the anterior wall of the chassis is made solid and in construction added the cover for the rear fan, included damping pad for hard drives and fans, as well as 'soft' feet, on which the hull stands.



Lian Li PC-B12 is currently available only in black version. Its dimensions are 498 (L) x 210 (W) x 472 (H) mm, weight — 6.4 kg. Inside can be placed the motherboard form factor ATX or microATX, a maximum of 8 cards PCI-E expansion up to 360 mm, the CPU cooler up to 160 mm, power supply, three hard disk format 3.5 «and one 2.5». The pair of «external» 5.25-inch bays should as well be considered.


New model doesn’t have vent on the front panel; it is migrated to the lower bound of the chassis and serves two 140 mm fan located opposite basket for storage. Blow-out …

Xilence Company has presented a kilowatt power supply unit of XQ series

Taiwanese company Xilence released two PSU of unusual design — XQ Series of 750 and 850 W capacities. In contrast to usual offers on the market, these PSU are equipped with a pair of 60-mm fans. It has separate adjustment of speed and can operate in a completely passive mode at a load of up to 20-30%.



Recently, Xilence added to the above-mentioned series a power supply with nominal 1000W. New model in the pre-sale testing was certified with 80 Plus Platinum, which indicates the level of efficiency from 90% to 94% in the system of 230 V. Like its predecessors, the unit uses a modular principle of cabling, active power factor correction mechanism and complies with ATX12V v2.3 and EPS12V v2.92 standards. The list of available power cables (connectors) is the following: 4x PCI-E 6-pin, 4x PCI-E (6 + 2)-pin, 7x Molex 4-pin, FDD, 12x SATA, EPS12V (4 +4)-pin, EPS12V 8-pin and ATX (20 +4)-pin.


Five-year warranty on the Xilence XQ 1000W provides the possibility of replacement the …

The New Fan from Antec – Rainbow 120 RGB – Will Be Available at the Price of 15 EUR

The range of Antec chassis fans has been widened by the Rainbow 120 RGB model. Its name suggests, that this product is of 120 mm typical size. LED backlighting of Rainbow 120 RGB renders up to 256 shades to produce dynamic effects or covers up to seven colours in the static mode. Moreover, the setup chosen by the user is supported after the PC switching off. The backlighting is adjusted just by pushing a little button.



The special blade configuration directs air flow to the outer side, thus increasing the static pressure level and enhancing the process of flows distribution inside the system unit. Fluid bearings extend the service life, and fan rubber pads at the places of mounting holes lower the vibration and noise level.


The top rotational speed of Rainbow 120 RGB is 1,200 rpm, and the air flow capacity equals to 1.2 m3/min. This device possesses a three-pin power supply connector and features the 12 V nominal voltage. The noise factor is not higher than 24.8 dBA.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.41
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 August 2012, 19:39
Last visit: 04 August 2012, 00:12