Plextor Prepares the Release of M5P SSD

Plextor is currently preparing a new SSD series, codenamed M5P. According to the forecasts, this series will be differentiated by high-performance characteristics and Serial ATA 3.0 interface. M5P will be represented by three models of 128 GB, 256 GB and 512 GB volume capacities. All the model lines are developed with the utilization of 19 nm technological process. In addition, all SSDs will be equipped with NAND flash-memory (MLC Toshiba) and Marvell 88SS9187 controllers.



Three models differ from one another by the flash-memory volume. Thereby, 128 GB models accommodates 256 MB of DDR3 cache-memory, 256 GB model – 512 MB, and the last one, 512 GB model – 768 MB. Those SSDs support SATA 6 Gb/sec.


The manufacturer claim that the maximal consecutive reading and writing speeds will achieve 540 Mb/sec and 340 Mb/sec correspondingly (with 128 GB model); 256 GB and 512 GB models will achieve 540 Mb/sec in reading and 450 Mb/sec in writing mode. At the same time, M5P series …

Adata Boasts Three New Premier Pro Solid-State Drives

The product line of SSDs from Adata has been replenished with three high-performance models. The SP910, SP900 M.2 2242 and SP900 M.2 2280 enter the award-winning Premier Pro series and might be implemented within various market segments (desktop, laptop or ultrabook solutions). In keeping with the manufacturer, the triple is thought to marvel the customers by super-high speeds, reliability, and instant response.



Adata Premier Pro SP910 is developed in 2.5-inch form-factor, featuring MLC NAND flash memory chips and Marvell 88SS9187 controller. The model employs SATA III 6 Gb/sec interface and offers 128 GB or 1TB storage area. Moreover, it supports a variety of useful tools, including S.M.A.R.T., ECC, etc.


This SSD is differentiated by some striking speed characteristics. Thus, its ultimate sequential Read/Write speed equals to 560/460 MB/sec, whereas the ultimate random Read/Write speed (4 K) makes up 91.000/77.000 IOPS. The new-comer is delivered along with a 3.5-inch …

The EK-FB MSI Z270 Gaming Monoblock RGB Water Unit Is Compatible With Low-Capacity Pumps

The Slovenian EK Water Blocks Company has produced the EK-FB MSI Z270 Gaming Monoblock RGB water unit, designed to serve with a range of Z270 chipset based MSI motherboards. Specifically, the list includes the MSI Z270 Tomahawk, MSI Z270 Tomahawk Arctic MSI Z270, Gaming Pro, MSI Z270 Gaming Pro Carbon, MSI Z270 SLI, MSI Z270 SLI Plus, as well as MSI Z270 Krait Gaming models.



The water block draws off heat from the LGA-1151 processor and from effective power subsystem voltage controllers. The device is supplied with a LED strip, optimized for a 4-pin connector on a system board or an external controller. This strip can be removed or replaced by a new one.


The nickel-plated water block base is made out of copper, and the transparent lid — out of acrylic plastic. The Low Hydrodynamic Resistance of the unit allows to utilize it with low-capacity pumps.


The approximate price of the specialty from EK Water Blocks is 120 EUR.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 30 December 2011, 22:38
Last visit: 31 December 2011, 00:57