Scythe to Introduce Monochrome Pro and Monochrome Value CPU Coolers



Scythe, an outstanding developer of prime-quality hardware solutions, announces its newest elaborations: the Monochrome Pro and Monochrome Value CPU coolers. Both products are differentiated by truly small-sized dimensions and can be incorporated into the most compact PC cases. The couple supports the latest Intel’s processors, which TDP level does not go beyond 95 W. So far, there is no information about the release date and pricing, however, Scythe promises to unveil the data in the short run.


In terms of framework, CPU cooler Scythe Monochrome Pro consists of an aluminum heatsink and a single fan. It features 112x112x62 mm dimensions and is compatible with Intel LGA 1150/1155/1156 platforms. Running at 800-2800 RPM, it is able to produce up to 52.98 CFM airflow (the minimal airflow index equals to 14.83 CFM). When running at low pace, the noise level stays at the minimal level of 10.2 dB; still, even when the rotational speed achieves its maximum, the noise does not …

Greeting New HIS R7 260 iCooler 1GB GDDR5 Graphics Card

The lineup of graphics cards designed by HIS has been replenished with a new Radeon R7 260 model. Entitled HIS R7 260 iCooler 1GB GDDR5, the new-comer employs a typical PCI Express 3.0 x16 interface and comes with etalon clock frequencies. The R7 260 GPU (GCN, 28 nm) with 768 CUDA cores runs at 1000 MHz. It is accompanied by 1 GB of GDDR5 memory (128-bit bus) that operates at 1500 MHz/ 6000 MHz typical/effective frequency.



This adapter receives power through one 6-contact connector. Connectivity with PC monitors is realized due to three video ports: DisplayPort, HDMI and DVI-I. GPU and memory modules are cooled down by the forces of iCooler. It is not differentiated by an offbeat design; it consists of an aluminum heatsink and one low-profile fan.


Still, it offers acoustic convenience while fulfilling standard tasks: the maximal noise level does not exceed the limit of 28 dB. A supplementary aluminum heatspreader can be found in power supply section.


The HIS R7 260 …

Adata Intros M.2-Type SX8000 Solid-State Drive

Adata keeps on developing its hardware potential. This time the company introduces a lineup of M.2 2280 solid-state drives, targeting gamers & enthusiasts. The XPG SX8000 is based on 3D MLC NAND chips, combined with SMI 2260 controller. The drive employs PCI Express 3.0 x4 external interface and shows a total compatibility with NVMe 1.2 standard.



Adata XPG SX8000 will be available in four capacities: 128 GB, 256 GB, 512 GB & 1 TB. Nonetheless, the company has unveiled performance showings only for the first three models. Thus, the junior model offers 1000/300 MB/sec speed on sequential Read/Write operations (ATTO compression); 1000/300 MB/sec speed on sequential Read/Write operations (CrystalDiskMark uncompressed); 900/280 MB/sec speed on sequential Read/Write operations (AS SSD uncompressed). At the same time, the drive’s random showings make up 45000/75000 IOPS (Read/Write).


To continue, the XPG SX8000 256 GB item features the following efficiency specifications: …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.41
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 07 November 2012, 23:49
Last visit: 11 December 2012, 16:11