Monitor Viewsonic VX2770Smh-LED Review

In the pursuit for the state-of-the-art technological tendencies, a lot of manufacturers sometimes forget about the needs of their customers. Still, there are some companies, like Viewsonic, that never sacrifice the longing of their potential audience for convenience and performance, by delivering only high-quality and targeted products. Monitor VX2770Smh-LED from Viewsonic is one of such products that is intended specifically at PC users, satisfying their basic needs and even surpassing their expectations.



Design and Ergonomics


Viewsonic VX2770Smh-LED is a 27-inch monitor with 1920x1080 resolution and 16:9 aspect ratio. It is based on AH-IPS array and is equipped with W-LED power-saving backlight. Its design might be characterized as a symbiosis of a frameless display and a stand in the form of a leg – a brand Viewsonic development. The display casing is made of dull plastic, while its stand is all about glossy plastic. Cable-management system, as well as VESA bracket, …

ASRock FM2A88M-HD+ to Support the Latest AMD Kaveri APUs

ASRock has recently announced a new series of motherboards that are based on the prime-class AMD A88X chipset, targeting Socket FM2(+) CPUs of Trinity and Richland generation. Moreover, they are supposed to support the new-gen AMD Kaveri APUs with Steamroller microarchitecture. One of the most outstanding models within the series is FM2A88M-HD+ motherboard, which features a large amount of slots and sockets. At the same time, it remains a cost-efficient solution.



ASRock FM2A88M-HD+ is designed in a micro-ATX form-factor, featuring 234x183 mm dimensions. The company claims that this model is able to accommodate DDR3 RAM with 2133 MHz frequency, housed in two DIMM slots. Therein, the maximal memory capacity might achieve 32 GB. Hardware base consists of prime-quality solid-state capacitors and durable chokes. Three expansion slots are introduced by one PCI, one PCIe 2.0 x1, and one high-speed PCIe 3.0 x16; the latter demonstrates up to 15.75 Mb/sec bandwidth.


Storage …

The New Fan from Antec – Rainbow 120 RGB – Will Be Available at the Price of 15 EUR

The range of Antec chassis fans has been widened by the Rainbow 120 RGB model. Its name suggests, that this product is of 120 mm typical size. LED backlighting of Rainbow 120 RGB renders up to 256 shades to produce dynamic effects or covers up to seven colours in the static mode. Moreover, the setup chosen by the user is supported after the PC switching off. The backlighting is adjusted just by pushing a little button.



The special blade configuration directs air flow to the outer side, thus increasing the static pressure level and enhancing the process of flows distribution inside the system unit. Fluid bearings extend the service life, and fan rubber pads at the places of mounting holes lower the vibration and noise level.


The top rotational speed of Rainbow 120 RGB is 1,200 rpm, and the air flow capacity equals to 1.2 m3/min. This device possesses a three-pin power supply connector and features the 12 V nominal voltage. The noise factor is not higher than 24.8 dBA.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 22 November 2011, 11:40
Last visit: 25 May 2012, 22:37