HIS Teases New Radeon R9 280X IceQ Boost Clock Graphics Card

HIS is glad to introduce one more high-end solution: the Radeon R9 280X IceQ Boost Clock graphics card that is targeting high-performance PC systems. The model employs turbine-type cooling system with a branded IceQ cooler. It consists of a voluminous copper base (35x28 mm), an aluminum heatsink, four nickel-plated heat-pipes (2x 8 mm and 2x 6 mm), as well as a single 80 mm turbine fan. Such cooling is ideal for multi-GPU configurations in AMD CrossFireX mode, since the distance between adapters does not influence the efficiency of their fans.



The new-comer is based on AMD Radeon R9 280X GPU (28 nm, GCN) with 2048 stream processors. It runs at standard frequencies: 850 MHz – nominal and 1000 MHz – dynamic. Memory is introduced by 3 GB GDDR5 modules, which run at standard 1500 MHz frequencies and reach some 6000 MHz effective index.


To continue, HIS Radeon R9 280X IceQ Boost Clock features four connectivity interfaces: a pair of mini-DisplayPort ports, one DVI-I and …

Intel is preparing a new motherboard on chipset Z77 and Z75

Intel Corporation has a rather wide range of motherboards for processors Core i5/i7-3000 (Ivy Bridge), but, nevertheless, continues to produce products based on chipsets 7-Series. According to reports, the release of two motherboards Intel LGA1155 — DZ77GAL-70K is planned soon with code-named Gasper Light and DZ75ML-45K (Middle Lake). The first model uses a set of system logic Z77, second — Z75. Both models will receive a certificate of Windows 8 WHQL, support of Fast Boot technology and Lucid Virtu MVP.



Model Intel DZ77GAL-70K is based on the same PCB, as the previous DZ77GA-70K (Gasper) and DZ77RE-75K (Roads End). In contrast to the board DZ77GA-70K, new doesn’t have a rich set of delivery: WiDi-compatible adapter with an antenna, Bluetooth, remote panel with two USB 3.0 ports and a mouse pad Intel Extreme Series. Due to this, it will be cheaper than DZ77GA-70K.


In turn, Intel DZ75ML-45K (Middle Lake) is a compromise models between the DZ77SL-50K and DH77KC. This …

Computer Case be quiet! Silent Base 600 Overview (Part II)

Internal structure

The motherboard compartment is located above the power supply unit. In this regard, everything is quite standard for a Mid Tower class. A large cutout is made in a tray behind a CPU socket, to allow installation of a CPU cooling system directly into the case; a backplate mount (thrust-pad located on the back side of the motherboard) is used for this purpose.


The four large slots in a tray, equipped with the silicone membrane, are designed for proper cable management which looks very promising here. Plugs of expansion slots are attached by thumbscrews. The front part holds a hard disks’ basket for three drives.


At the back side a slot in a tray can be clearly seen to access cable management system slot. Also, the rear side contains two tool kits for installation of solid-state drives and size 2.5" hard disks.


The side cover is made of 0.7 mm steel, and from the inside has a thick vibration and noise absorbing coating. The recess in the …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 18 July 2012, 14:14
Last visit: 18 July 2012, 15:29