Asus is the one to introduce the largest assortment of graphics adapters based on a fresh Nvidia Maxwell GPU. The range of suggested products involves two models from Asus GeForce GTX 750 series and three models from Asus GeForce GTX 750 Ti series. All five new-comers are differentiated by an ameliorated PCB design with the incorporation of Super Alloy Power components.



The GTX 750 series consists of GTX750-PH-1GD5 and GTX750-PHOC-1GD5 cards. Both of them come with an integrated Nvidia GM107-300 GPU, equipped with 512 CUDA cores. The first model operates at 1020 MHz/1085 MHz (nominal/boost) frequency, whereas its companion runs at 1059 MHz/1137 MHz. They employ 1 GB of GDDR5 memory, demonstrating 1252 MHz/5010 MHz (nominal/efficient) frequency. The cards also have an identical video interface panel that embraces one HDMI, one D-Sub, and one DVI-D port.


The GTX 750 adapters accommodate analogous cooling system with a single Dust-Proof Fan. The latter is called to keep the …

Introduction


There are three types of PSU: standard, partially modular and modular. Conventional power supplies are those to which most users are accustomed, such models have a large bundle of wiring tightened inside the case.There is no possibility of increasing the length of the cables, replacing them in the occasion of damage, or simply dismantling unnecessary lines. The second type is these ones to which our experimental, partially modular systems belong. There comes out a limited number of wires, and as a rule, the other cables are connected using connectors on the case. And the third option is when all the wiring are completely disconnected from the case. Modular system allows you to get rid of problems with extra wiring, taking up a lot of space inside the case and worsening air circulation. Usually such models cost a little more.


Packaging and Design


AeroCool KCAS-650M 650W is arrived in a dark package, on the front part there is a logo of the 80 PLUS Bronze …

Samsung has recently announced the release of two new SSD series, intended basically for the employment in corporate segment (for servers and large data storages). The first series, codenamed SM843, will be represented by models of 120GB, 240GB and 480GB capacity; the second series, codenamed SM1625, will contain models of 100GB, 200GB, 400GB, and 800GB capacity.



All the models within the series are based on MLC NAND flash-memory, developed under 20 nm technological process. This allowed the company to increase the writing speed index and SSDs durability three times as much, if compared with rival drives and items of the previous generation.


SM843 solid-state drives are designed in 2.5-inch form-factor. They are notable by 28% lower power consumption in active mode and 80% lower retention time. The models employ SATA 3.0 interface and demonstrate the following speed showings: consecutive Read speed achieves the point of 520 Mb/sec, consecutive Write speed equals to 420 …