Pronalaženje upravljačkih programa na ID ili naziv uređaja

Poznati uredaja:165022367

Posljednji poznati vozač: 23.12.2020

Ad

Обзоры devid.info

Aerocool Project 7 PSU 650 W – a Worthy of Attention Novelty

Introduction

Not long time ago new power units of Aerocool Project 7 have come to the world and were marked by 80 Plus Platinum certificate.

Aerocool Project 7 is the whole conception which includes devices of different categories.
Aerocool is one the first brands to accredit the whole line using Cybenetics’ standards. The P7-650W Platinum has a LAMBDA-A++ noise rating.

All the devices of the given line look futuristic due to bright blue highlighting.

Aerocool mixed their last PSU series with the Project 7 and cooperated with TechPowerUp to get 650W.

It was made by Andyson and got a lot of checking before coming out.

It is sure to be quiet-working and to have a great power. The cable configuration was optimized and a powerful cooling fan was included.

The Project 7 line is an innovation for people who are ready to pay for the cutting-edge opportunity.

The Project 7 PSU line contains three members with capacity of 650-850 W.

Main Characteristics

Aerocool fitted the ACP-650FP7 with two EPS connectors and four PCIe connectors, which can be used simultaneously.

The carton box is big and is stylishly designed. You can see all the main details on the side of the box.

Inside you will find the device in a bag and a bundle of flexible flat black cables, zip ties and of course, the manual. The cables are long enough for comfortable using.
It’s worthy to pay attention to its modern design.

There is the optional RGB controller hub which allows to control the speed from 1 to 5 and can be used with all the Project 7 line items.

  • Aerocool P7-650W Platinum
  • Max. DC Output — 650W
  • PFC — Active PFC
  • Productivity — ETA-B, 80 Plus Platinum
  • Noise — LAMBDA-A++
  • Modular — fully
  • Intel C6/C7 Power State Support
  • Operating temperature — 0°C ~ 50°C
  • Protections: Over Voltage Protection, Under Voltage Protection, Over Power Protection, Over Current Protection, Short Circuit Protection
  • Cooling — 140mm Fluid Dynamic Bearing Fan (CD1425M12F)
  • Semi-passive operation
  • Dimensions — 150 mm (W) x 87 mm (H) x 167 mm (D)
  • Weight — 1.8 kg
  • Compliance — ATX12V v2.4, EPS 2.92
  • Warranty — 7 years
  • Price — $125

The unit has a fresh design solution and all three sides are capped by a metallic protection.
The first sector of the EMI filtering phase is on the PCB that influences the AC storage.

It has an X cap and two Y caps. The same filter is on the main PCB with two Y caps, two X caps, a pair of CM chokes, and an MOV. It contains two bridge rectifiers (GBU1006). They are quite powerful to meet the requirements of the ACP-650FP7.

The fan uses an FDB bearing, and its maximum speed is regulated to prevent superload. It is necessary to say that it is regulated by an easy fan profile.

Parameters of Productivity

Hold-up time is a meaningful PSU feature and represents the amount of time the system is able to work without switching off or restarting. Our device has the minimum hold-up time to 17 ms with the maximum continuous output load.

This signal should be asserted as high, at 5V, by the power supply to demonstrate that the +12V, 5V, and 3.3V outputs are within the regulation entrance and that enough energy is hold by the APFC converter to promise the long-lasting working period within specifications for minimum 17 ms.Vice versa, PWR_OK is to be de-asserted to a low state, 0V, when any of the +12V, 5V, or 3.3V output voltages get low of its under voltage starting point, or when mains power is transferred for a adequately long time, such that the power supply's operation cannot be maintained.

The AC loss to PWR_OK minimum hold-up time is set at 16 ms. It is less than the hold-up time described earlier, but the ATX description says that the PWR_OK inactive to DC loss delay is to be more than 1 ms. This means that the AC loss to PWR_OK hold-up time should always be lower than the PSU's overall hold-up time, which guarantees that the power supply will never go on sending a power good signal at the same time when +12V, 5V, and 3.3V rails are out of spec.

Load regulation at +12V is strong, losing only to the cutting-edge Seasonic platforms. The same applies to the other rails. The ACP-650FP7 has great load regulation, and its efficiency is huge.

Why to choose Aerocool Project 7 PSU 650 W?

This is one of the latest innovations where quite high price is justified by great quality.
The device has the ability to deliver full power at 46°C.
It is one of the quietest PSUs in its category.
Perfect ripple elimination is possible without using heavy caps
It has an excellent build quality and superb Japanese filtering caps.
Full protections setting is available.
It contains FDB (featuring RGB LED lighting) fan.
It is fully modular.
It is compatible with the optional RGB controller hub.
Very long (7-year) warranty is given.
  • 0
  • 29 August 2017, 16:09
Only registered users can comment.