The Taiwan Enermax vendor replenishes its product offering with a Mid-Tower Equilence chassis, which has made its first appearance in the frame of the Computex 2017 exhibition.



The novelty is intended for ATX mother cards installing and for low-noise systems assembling. It got a 4 mm tempered glass side, making all inner components clearly visible, and three (front, upper and side) panels, provided with dense sound insulating foam.


The Equilence PC Case can hold seven expansion cards of the up to 420 mm length, an ATX-compatible power supply, a couple of 3.5” and four 2.5” drives. Высота процессорной системы охлаждения не должна превышать 175 мм.


This specialty affords flexibility concerning air and liquid cooling systems mounting. Thus, one can install up to nine 120 mm fans, as well as heat sinks of the 360, 280, 240, 140 and 120 mm form factor. The CPU cooler ultimate height equals 175 mm. Coonectivity …

Silicon Power, a renowned Taiwanese designer of various storage solutions, amplifies its solid-state drives line with a new series, entitled Slim S50. This series is introduced by four models of 32GB, 64GB, 128GB, and 256GB capacity. All of them are housed in a really slim black casing (7mm) that owns vibration-proof and shock-proof properties. The drives are characterized by the employment of a high-speed SATA III 6Gb/sec interface.



Whatever the model is under consideration, Slim S50 drives demonstrate compatibility with PCs of various form-factor, including the most advanced and compact ultrabooks. Along with the exponential physical properties, these SSDs are ready to provide the customers with a stable and utmost performance.


Thus, the maximal sequential reading speed equals to 530Mb/sec, while the speed on sequential writing speed approximates 200Mb/sec. Unfortunately, Silicon Power does not specify the showings on random Read/Write operations; there is also no …

Main Features

According to the manufacturer’s specifications, the case may accommodate very large components: a video card up to 375 mm (or 400 mm in the absence of the front fans) and a power supply of up to 200 mm in length. CPU cooler may be up to 165 mm high.


Despite the construction of Aerocool P7-C1, the power supply is placed in the most common way, and the board is set to the standard six-millimetre racks. The thumbscrews for fixing it are not supplied.


Let’s have a closer look onto the drive installation. The carriers for 3.5" storage devices are simply stretched on hard drives. They are to be straightened a little to be installed. The 2.5" storage devices are attached to the carriers’ by cogs, and it is possible to mount them not only to the ends, but to the ground as well.


The carriers with the mounted hard drive are simply retracted and sit in place securely enough. And the solid-state drives are fixed to the carriers by thumbscrews.

…