Following the release of Urban S31 PC chassis, Thermaltake put its best foot forward to introduce one more representative of Urban series – Urban S41. This is a mid-tower case of a minimalistic design, with totally black exterior and interior. The model is vested in SECC steel coverage and will be available in two framework variations: with a large side-facet window and without it. In its entirety, the chassis features 516x220x520 mm dimensions and weighs 8.9 kg.



Thermaltake Urban S41 is ready to welcome all contemporary motherboards of ATX and micro-ATX standard. Despite its mid-tower framework nature, its internal capacity does not yield to some full-tower case species. Therefore, it positions four external drive bays of 5.25-inch format, five internal bays for 3.5-inch or 2.5-inch drives, and seven slots for PCI expansion cards. Additionally, the case is equipped with an external top-facet dock for the installation of drives with SATA interface (HDD/SSD). The frontal I/O …

Kolink has announced the Observatory chassis, aimed at assembling desktop systems with rather strict, though eye-catching outer appearance.

 

The novelty, performed in black, possesses the front and one side panels out of smoked tempered glass 4 mm thick. The case encloses four 120 mm fans, supplied with the multi-coloured RGB-backlighting, three of which are located on the front, and one – at the rear. Users may also add two 120 mm coolers in the top part.

 

This framework presupposes the utilizing of E-ATX (up to 279 mm wide), ATX, Micro-ATX and Mini-ITX motherboards. There also are mounting seats for seven expansion cards. The length of discrete graphics accelerators should not overcome 390 mm. Besides, the Observatory chassis is able to house two drives of the 3.5” or 2.5” form factor. In the case of liquid cooling system applying one may install 240 mm heatsinks at the front and atop, while the CPU cooler is …

In the nearest time, Thermalright is going to present TRUE Spirit 120 Direct, which is a cooling device of an average efficiency. This construction weighs around 600 g and is 120 mm long, 67 mm wide and 141 mm high. It will apparently cost less than TRUE Spirit 140 Direct models (going for approximately $47).



The heatsink of TRUE Spirit 120 Direct consists of an aluminium pressure plate, four U-shaped copper nickelized 6 mm heat pipes and tens of perforated aluminium plates. The 120 mm fan is attached to the radiator by standard wire spikes. The rotary speed of this unit is unknown yet, however, taking into account another 120 mm fan cooler (TRUE Spirit 120M BW Rev.A), we may assume it will not exceed 1,500 rpm.


It is remarkable that in the lower part the fan is located almost at the base level. Such a strange design may prove its worth in systems, including motherboards with massive, but ineffective VRM heatsinks.


The list of compatible motherboards and processors …