AMD Highlights Plans for the Transition to the 28nm Process

AMD is a company known for the continual and elaborate work on the development and improvement of all product lines, as well as technological standards. Thus, the coming 2013 year is supposed to be portentous for the company in terms of the implementation of 28nm standards in their APU. AMD has recently voiced the plans for the change of the Trinity APU to a new model, codenamed Richland, and the transition to 28nm technological process.



The new APU, Richland, is presumably to be released in two versions: dual-core and quad-core. It will support a number of high-performance technologies, such as Blu-ray 3D, dual graphics, Open CL, AMD turbo core overclocking, and some others.


According to the preliminary information, Richland will employ FM2 socket (which Trinity employs) and Radeon 8000 series DirextX 11 GPU. This GPU will be furnished with 128 cores in dual-core model line, and with 384 cores in the high-end A10 APU. The same number of cores has been implemented in …

A New Series of Haswell-Based Gigabyte Brix Mini-PCs

The appearance of Brix mini-PCs last spring was Gigabyte’s debut in this market segment. The first products were elaborated specifically for Intel Ivy Bridge processors. However, the company decided to update the line of ultra-compact PCs with four new models. Entitled GB-BXCE-2955, GB-BXi7-4500, GB-BXi5-4200, and GB-BXi3-4010, the products are characterized by the support of power-efficient Intel Haswell CPUs.



The most efficient model is Gigabyte GB-BXi7-4500 with the integrated Intel Core i7-4500U processor (1.8/3.0 GHz), whereas the least efficient turns to be Gigabyte GB-BXCE-2955, based on Intel Celeron 2955U (1.4 GHz). At the same time, Gigabyte GB-BXi5-4200 is equipped with Intel Core i5-4200U CPU (1.6/2.6 GHz) and Gigabyte GB-BXi3-4010 comes with Intel Corei3-4010U solution (1.7 GHz).


Except for diverse CPUs, all four Brix mini-PCs feature practically analogous specifications:

— dimensions: 114.4x107.6x29.9 mm;

— memory: two DIMM slots, support for 16 …

MSI is preparing new model - Radeon HD 7970 with a water-block

The well-known in IT-maker Company MSI announced about appearance of new videoadapter based on GPU Tahiti XT chipset. Its diversity from the other Radeon HD 7970 can be seen with the naked eye, instead of an air cooler practically the entire surface of the PCB is covered with waterblock brand EK. It differs markedly from the original version, since it is designed specifically for the MSI R7970 Lightning model. Relation of adapter to the Lightning series is easily determined by the inscription at the interface connector PCI-E 3.0 x16, as well as non-standard set of video outputs (2x DVI, 4x Mini DisplayPort) and configuration of additional power connectors (2x PCI-E Power 8-pin).



Obviously, the accelerator is positioned as the Radeon HD 7970 GHz Edition and has a nominal frequency of at least 1050 MHz. Will MSI risk, like Sapphire did, and provide the card with 6 GB of memory? Probably not. The «advanced» composition of the printed circuit board and water block of full coverage …
Get computer-assisted driver seach with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Dell Inc. Inspiron N4030

  • BATTERY
  • CDROM
  • COMPUTER
  • DISKDRIVE
  • DISPLAY
  • HDC
  • HIDCLASS
  • IMAGE
  • KEYBOARD
  • MEDIA
  • MONITOR
  • MOUSE
  • NET
  • OTHER DEVICES
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME
  • VOLUMESNAPSHOT