Gyrwyr gan ADNABOD neu enw y ddyfais
Hysbys ddyfais: 165022367
Mae'r olaf yn hysbys gyrrwr: 23.12.2020
New Eisblock XPX Water Units by AlphaCool
Transfer efficiency of the thermal energy flux from the CPU to the cooling liquid in the circuit depends on the water unit. The AlphaCool Company, being famous for its liquid-cooling system components, has presented a new water units series, called Eisblock XPX. They’ll take the place of the previous model, NexXxoS XP3. The series of Eisblock XPX water blocks will be released on the market featuring various colour schemes, including the mountings colour. The manufacturer has taken into account the latest trends.
In new models the heat-exchange zone microchannel structure is refined: the fin spacing is reduced to 0.2 mm, and the fins number has grown up to 81. Thus, the heat-exchange area has become larger. The brand Ramp technology is applied to the heat-exchanger, which guarantees the absence of the coolant flow vorticity and its steady passing through the microchannels zone. At the same time the hydraulic circuit has been optimized to diminish flow resistance. Eisblock XPX doesn’t require a high static pressure pump. Though, these novelties can withstand up to 2 atm.
This feature makes it possible to use less powerful or slow-speed pumps, so the noise level will be lower. The Eisblock XPX contact area has been optimized for CPUs with a large chip, and the liquid flow zone dimensions have increased to 34 × 32 mm. The Eisblock XPX mount system is very simple: you only need to set the appropriate crossing. Eisblock XPX external dimensions are 65 × 65 × 30 mm, and the threaded holes are scaled to fit standard fixtures of G1/4″ typical size.
In new models the heat-exchange zone microchannel structure is refined: the fin spacing is reduced to 0.2 mm, and the fins number has grown up to 81. Thus, the heat-exchange area has become larger. The brand Ramp technology is applied to the heat-exchanger, which guarantees the absence of the coolant flow vorticity and its steady passing through the microchannels zone. At the same time the hydraulic circuit has been optimized to diminish flow resistance. Eisblock XPX doesn’t require a high static pressure pump. Though, these novelties can withstand up to 2 atm.
This feature makes it possible to use less powerful or slow-speed pumps, so the noise level will be lower. The Eisblock XPX contact area has been optimized for CPUs with a large chip, and the liquid flow zone dimensions have increased to 34 × 32 mm. The Eisblock XPX mount system is very simple: you only need to set the appropriate crossing. Eisblock XPX external dimensions are 65 × 65 × 30 mm, and the threaded holes are scaled to fit standard fixtures of G1/4″ typical size.
Comments 0
Collapse comments / Expand comments