Welcome the next novelty from Dell – a thin S2718D QHD display, the edge of which is 6.9 mm only.



Ensuring the brightness level of 400 nits and a 1000:1 contrast ratio, this monitor renders 99 % of the sRGB colour gamut. Its response time equals to 6 ms and its viewing angle is 178 degrees.


The S2718D model with the 2,560 x 1,440 pixels resolution, a 60 Hz refresh rate and an IPS panel offers the handy USB Type-C connectivity, HDMI 2.0, as well as an audio line-out for an amplifier or a speaker utilizing. This product cannot be mounted onto the wall, though this fact is surpassed by the presence of the 45 W USB C connector, providing a possibility of charging laptops, which support this type of charging.


The expected price of the S2718D display is 699 USD.

Thermaltake has added to its Versa lineup of chassis a new-comer – the N25. The middle-tower case is targeting primarily extreme gamers who covet ultimate performance and one-off design. The case features 490x197x463 mm dimensions & weighs 4.6 kg. Its key attraction is the trimming of the front and top panels which resemble the armor of transformers. The other peculiarity is the side acrylic window. Upon the whole, all panels are painted black as outside, so inside.



Thermaltake Versa N25 is intended for standard ATX, mini-ITX and micro-ATX motherboards with 7 expansion slots. Storage subsystem offers four seats for 2.5-/3.5-inch drives (internal) as well as two external 5.25-inch drives & one external 3.5-inch unit. Drive mounting might be realized without any tools.


Base N25 comes with a single 120-mm rear exhaust fan that rotates at 1000 RPM. If necessary, users are free to install four other 120-mm fans on the front and top facets (dust filters are included). In …

Thermaltake is launching Core G21 Tempered Glass Edition, aimed at building glamorous gaming systems.



The novelty is performed in the Mid Tower format. Side panels are made out of 4 mm tempered glass, which gives a perfect view of inner components.


Core G21 Tempered Glass Edition is ready to hold ATX, Mini ITX and Micro ATX motherboards. Up to seven expansion cards can be utilized. There is also enough space for 2.5’’ storage devices, as well as for two 3.5’’ or 2.5’’ drives. The case encloses up to 410 mm graphics accelerators. A CPU cooler can be 160 mm high, and a power supply can be 220 mm long.


Customers can install fans in the front (3 × 120 mm or 2 × 140 mm), rear (1 × 120 mm, pre-installed), upper (1 × 120 mm or 1 × 140 mm) and lower (1 × 120 mm) areas. Liquid cooling systems can be used with a 360/280 mm heatsink (in front) or 120 mm radiator (in the back).


The Thermaltake specialty with 476 × 208 × 471 mm dimensions weighs 8.05 kg. …