The Enermax company releases two new MaxTytan series power supplies of 1050 and 1250 W rated capacity. These products are 80 Plus Titanium certified and are highlighted due to the presence of the watt-hour meter in their construction, which monitors current system energy consumption.



The Enermax specialties are equipped with high temperature (105°C) capacitors, produced in Japan, and are protected from various abnormal modes. Through a 12V circuit the upper model can provide up to 104 А (1,248 W), and the lower sample — up to 87.5 А (1,050 W). Peak bearable power of these devices is 1,375 and 1,155 W.


Enermax MaxTytan components are chilled by 140 mm fans, based on Twister bearing. The fans start rotating only after load overcomes 70% of nominal power. The supply kit contains the CoolerGenie fan controller, allowing to enable chilling only after power consumption exceeds 40/55% of rated values. In the meantime, the fans, linked to CoolerGenie, keep rotating for 40-60 …

Kingston Technology, a large-scale developer of varied memory solutions from California, announces the launch of a new solid-state drive from SSDNow series, codenamed mS200. Currently, the model is available in two larger versions of 240 GB and 480 GB. Both new-comers are designed in mSATA form-factor, featuring 50.88x30 mm dimensions. Upon the whole, their dimensions are 8 times smaller than those imposed to standard 2.5-inch products.



Kingston mS200 are targeting budgetary segment of laptops, tablets and ultrabooks. Nonetheless, the drives are able to demonstrate high performance and allow the user to install two items within one system at a time in order to enlarge the storage volume. The new SSDs support Intel Smart Response Technology, TRIM, S.M.A.R.T., as well as 128-bit automatic encoding; they are thought to dramatically enhance the performance.


To continue, the greenhorns employ SATA III 6 Gb/sec interface and are based on LSI SandForce 2281 controller. In keeping …

Transcend, a renowned manufacturer of diverse data storage solutions, launches three new SSD models targeting industrial sector. Codenamed MSA740 and MSA630, the two models are developed in mSATA form-factor, while their companion, entitled HSD630, has got half-slim SATA format. In retail sale all three SSD lines are available in several capacity variations. Hence, MSA740 with SATA III 6Gb/sec interface goes with 32 GB, 64 GB and 128 GB capacities; at the same time, MSA630 and HSD630, featuring SATA II 3Gb/sec interface, go with 32 GB and 64 GB capacities only. All three SSD lines are characterized by a proven durability, stability of operation, and low power consumption, combined with an utmost efficiency.



SSD Transcend MSA740 features 29.85x50.8x4 mm dimensions and is equipped with a powerful controller that promotes for the highest speed showings. The maximal sequential Read/Write speed equals to 520/270 MB/sec correspondingly, while the maximal random Read speed (4KB blocks) …